Electrical & Electronic Engineering Books

1. Electrical Engineering: Principles & Applications (6th Edition) by Allan R. Hambley.

2. Introduction to Electrodynamics ,4e by .

3. Microelectronic Circuits (The Oxford Series in Electrical and Computer Engineering) 7th edition by Adel S. Sedra – Kenneth C. Smith.

ISBN 978-0199339136

4. Computer Networking: A Top-Down Approach (6th Edition) by James F. Kurose – Keith W. Ross.

ISBN 978-0132856201

5. Fundamentals of Electric Circuits by Charles Alexander – Matthew Sadiku.

ISBN 978-0073380575

6. Electric Circuits (10th Edition) by James W. Nilsson – Susan Riedel.

ISBN 978-0133760033

7. Control Systems Engineering by Norman S. Nise.

ISBN 978-1118170519

8. Practical Electronics for Inventors, Third Edition by Paul Scherz – Simon Monk.

ISBN 978-0071771337

9. Matlab: A Practical Introduction to Programming and Problem Solving by Stormy Attaway.

ISBN 978-0124058767

10. Signals and Systems (2nd Edition) by Alan V. Oppenheim – Alan S. Willsky – with S. Hamid.

ISBN 978-0138147570

11. NFPA 70®: National Electrical Code® (NEC®), 2014 Edition by National Fire Protection Association.

ISBN 978-1455906727

12. Introduction to Networks Companion Guide by Cisco Networking Academy.

ISBN 978-1587133169

13. Network+ Guide to Networks (with Printed Access Card) by Tamara Dean.

ISBN 978-1133608196

14. Microelectronic Circuits (Oxford Series in Electrical & Computer Engineering) by Adel S. Sedra – Kenneth C. Smith.

ISBN 978-0195323030

15. Programming Arduino Getting Started with Sketches by Simon Monk.

ISBN 978-0071784221

16. The Art of Electronics by Paul Horowitz – Winfield Hill.

ISBN 978-0521809269

17. Programmable Logic Controllers by Frank Petruzella.

ISBN 978-0073510880

18. Network+ Guide to Networks by Jill West – Tamara Dean – Jean Andrews.

ISBN 978-1305090941

19. Ugly’s Electrical References, 2014 Edition by Jones & Bartlett Learning.

ISBN 978-1449690779

20. Fundamentals of Logic Design by Jr. Charles H. Roth – Larry L Kinney.

ISBN 978-1133628477

21. Business Data Communications and Networking by Jerry FitzGerald – Alan Dennis – Alexandra Durcikova.

ISBN 978-1118891681

22. Feedback Control of Dynamic Systems (7th Edition) by Gene F. Franklin – J. Da Powell – Abbas Emami-Naeini.

ISBN 978-0133496598

23. Introductory Circuit Analysis (12th Edition) by Robert L. Boylestad.

ISBN 978-0137146666

24. Fundamentals of Applied Electromagnetics (7th Edition) by Fawwaz T. Ulaby – Umberto Ravaioli.

ISBN 978-0133356816

25. Linear Systems and Signals, 2nd Edition by B. P. Lathi.

ISBN 978-0195158335

26. Elements of Electromagnetics (The Oxford Series in Electrical and Computer Engineering) by Matthew Sadiku.

ISBN 978-0199321384

27. Delmar’s Standard Textbook of Electricity by Stephen Herman.

ISBN 978-1285852706

28. Principles of Electric Circuits: Conventional Current Version (9th Edition) by Thomas L. Floyd.

ISBN 978-0135073094

29. Digital Design and Computer Architecture, Second Edition by David Harris – Sarah Harris.

ISBN 978-0123944245

30. Introduction to Computing Systems: From Bits and Gates to C and Beyond by Yale N. Patt – Sanjay J. Patel.

ISBN 978-0072467505

31. Electronics Fundamentals: Circuits, Devices & Applications (8th Edition) by Thomas L. Floyd – David M. Buchla.

ISBN 978-0135072950

32. Make: Electronics (Learning by Discovery) by Charles Platt.

ISBN 978-0596153748

33. Electrical Wiring Residential by Ray C. Mullin – Phil Simmons.

ISBN 978-1285170954

34. Electric Circuits (9th Edition) by James W. Nilsson – Susan Riedel.

ISBN 978-0136114994

35. Digital Design with RTL Design, VHDL, and Verilog by Frank Vahid.

ISBN 978-0470531082

36. Color Coded EZ Tabs for the 2014 National Electrical Code by John Riley.

ISBN 978-1285200361

37. Modern Digital and Analog Communication Systems (The Oxford Series in Electrical and Computer Engineering) by B. P. Lathi – Zhi Ding.

ISBN 978-0195331455

38. Introduction to Networks v5.0 Lab Manual (Lab Companion) by Cisco Networking Academy.

ISBN 978-1587133121

39. The LEGO MINDSTORMS EV3 Discovery Book: A Beginner’s Guide to Building and Programming Robots by Laurens Valk.

ISBN 978-1593275327

40. Modern Control Systems (12th Edition) by Richard C. Dorf – Robert H. Bishop.

ISBN 978-0136024583

41. Microelectronics Circuit Analysis and Design by Donald A Neamen.

ISBN 978-0073380643

42. Business Data Communications and Networking by Jerry FitzGerald.

ISBN 978-1118086834

43. Power System: Analysis & Design by J. Duncan Glover – Mulukutla S. Sarma – Thomas Overbye.

ISBN 978-1111425777

44. Design for Electrical and Computer Engineers by Ralph Ford – Chris Coulston.

ISBN 978-0073380353

45. Digital Design: Principles and Practices (4th Edition, Book only) by John F. Wakerly.

ISBN 978-0131863897

46. National Electrical Code 2014 Handbook (International Electrical Code) by (NFPA) National Fire Protection Association.

ISBN 978-1455905447

47. Electrical Motor Controls for Integrated Systems by Gary Rockis – Glen A. Mazur.

ISBN 978-0826912268

48. Introduction to Electric Circuits by James A. Svoboda – Richard C. Dorf.

ISBN 978-1118477502

49. NFPA 70®: National Electrical Code® (NEC®), 2011 Edition by (NFPA) National Fire Protection Association.

ISBN 978-0877659143

50. Signal Processing and Linear Systems by B. P. Lathi.

ISBN 978-0195219173

51. Modern Control Engineering (5th Edition) by Katsuhiko Ogata.

ISBN 978-0136156734

52. CompTIA Network+ N10-006 Cert Guide, Deluxe Edition by Keith Barker – Kevin Wallace – Michael D. Taylor.

ISBN 978-0789754738

53. Digital Systems: Principles and Applications (11th Edition) by Ronald J. Tocci – Neal Widmer – Greg Moss.

ISBN 978-0135103821

54. Biomedical Informatics: Computer Applications in Health Care and Biomedicine (Health Informatics) by .

ISBN 978-1447144731

55. The Sound Reinforcement Handbook by .

ISBN 978-0881889000

56. Illustrated Guide to the National Electrical Code (Illustrated Guide to the National Electrical Code (Nec)) by Charles R. Miller.

ISBN 978-1133948629

57. Computer Networks, Fifth Edition: A Systems Approach (The Morgan Kaufmann Series in Networking) by Larry L. Peterson – Bruce S. Davie.

ISBN 978-0123850591

58. Computer Networks (5th Edition) by Andrew S. Tanenbaum – David J. Wetherall.

ISBN 978-0132126953

59. Electricity for Refrigeration, Heating, and Air Conditioning by Russell E. Smith.

ISBN 978-1285179988

60. Electrical Engineering: Principles and Applications (5th Edition) by Allan R. Hambley.

ISBN 978-0132130066

61. The Architecture of Computer Hardware, Systems Software, and Networking: An Information Technology Approach by Irv Englander.

ISBN 978-1118322635

62. Digital Fundamentals (11th Edition) by Thomas L. Floyd.

ISBN 978-0132737968

63. Feedback Control of Dynamic Systems (6th Edition) by Gene F. Franklin – J. David Powell – Abbas Emami-Naeini.

ISBN 978-0136019695

64. Introductory Circuit Analysis (13th Edition) by Robert L. Boylestad.

ISBN 978-0133923605

65. Engineering Circuit Analysis by William H. Hayt Professor Emeritus – Jack Kemmerly – Steven M. Durbin.

ISBN 978-0073529578

66. CompTIA Network+ Study Guide: Exam N10-006 (Comptia Network + Study Guide Authorized Courseware) by Todd Lammle.

ISBN 978-1119021247

67. Programmable Logic Controllers (2nd Edition) by James A. Rehg – Glenn J. Sartori.

ISBN 978-0135048818

68. Basic Engineering Circuit Analysis by J. David Irwin – Robert M. Nelms.

ISBN 978-0470633229

69. Digital Fundamentals (10th Edition) by Thomas L. Floyd.

ISBN 978-0132359238

70. CMOS VLSI Design: A Circuits and Systems Perspective (4th Edition) by Neil Weste – David Harris.

ISBN 978-0321547743

71. Black & Decker The Complete Guide to Wiring, Updated 6th Edition: Current with 2014-2017 Electrical Codes (Black & Decker Complete Guide) by Editors of CPi.

ISBN 978-1591866121

72. Principles and Applications of Electrical Engineering by Giorgio Rizzoni.

ISBN 978-0073220338

73. Principles of Electronic Materials and Devices by Safa O. Kasap Prof..

ISBN 978-0073104645

74. Delmar’s Standard Textbook of Electricity, 5th Edition by Stephen L. Herman.

ISBN 978-1111539153

75. Solid State Electronic Devices (7th Edition) by Ben Streetman – Sanjay Banerjee.

ISBN 978-0133356038

76. The Definitive Guide to ARM® Cortex®-M3 and Cortex®-M4 Processors, Third Edition by Joseph Yiu.

ISBN 978-0124080829

77. Arduino Workshop: A Hands-On Introduction with 65 Projects by John Boxall.

ISBN 978-1593274481

78. Mixing Secrets for the Small Studio (Sound On Sound Presents…) by Mike Senior.

ISBN 978-0240815800

79. Computer Networks and Internets (6th Edition) by Douglas E. Comer.

ISBN 978-0133587937

80. Semiconductor Physics And Devices: Basic Principles by Donald A. Neamen.

ISBN 978-0073529585

81. Data and Computer Communications (10th Edition) (William Stallings Books on Computer and Data Communications) by William Stallings.

ISBN 978-0133506488

82. Mike Meyers’ CompTIA Network+ Guide to Managing and Troubleshooting Networks, 3rd Edition (Exam N10-005) (CompTIA Authorized) by Mike Meyers.

ISBN 978-0071789110

83. Measurement and Data Analysis for Engineering and Science, Third Edition (Volume 2) by Patrick F. Dunn.

ISBN 978-1466594968

84. How to Diagnose and Fix Everything Electronic by Michael Geier.

ISBN 978-0071744225

85. Digital Electronics: A Practical Approach with VHDL (9th Edition) by William Kleitz.

ISBN 978-0132543033

86. Introduction to Microelectronic Fabrication: Volume 5 of Modular Series on Solid State Devices (2nd Edition) by Richard C. Jaeger.

ISBN 978-0201444940

87. An Introduction to Music Technology by Dan Hosken.

ISBN 978-0415825733

88. Basic Engineering Circuit Analysis by J. David Irwin – R. Mark Nelms.

ISBN 978-1118539293

89. Industrial Automated Systems: Instrumentation and Motion Control by Terry L.M. Bartelt.

ISBN 978-1435488885

90. Discrete-Time Signal Processing (3rd Edition) (Prentice-Hall Signal Processing Series) by Alan V. Oppenheim – Ronald W. Schafer.

ISBN 978-0131988422

91. Electrical Motor Controls for Integrated Systems by Gary J. Rockis – Glenn A. Mazur.

ISBN 978-0826912176

92. Signal Processing First by James H. McClellan – Ronald W. Schafer – Mark A. Yoder.

ISBN 978-0130909992

93. Data Communications and Networking by Behrouz A. Forouzan.

ISBN 978-0073376226

94. Barron’s 500 Flash Cards of American Sign Language by Geoffrey S. Poor.

ISBN 978-0764162220

95. Essentials of Electrical and Computer Engineering by David V. Kerns Jr. – J. David Irwin.

ISBN 978-0139239700

96. Foundations of Electronics: Circuits & Devices Conventional Flow by Russell Meade – Robert Diffenderfer.

ISBN 978-1418005412

97. Classical Electrodynamics Third Edition by John David Jackson.

ISBN 978-0471309321

98. Practical Problems in Mathematics for Electricians (Practical Problems In Mathematics Series) by Stephen Herman.

ISBN 978-1111313470

99. Raspberry Pi Projects for the Evil Genius by Donald Norris.

ISBN 978-0071821582

100. Introduction to Flight by John Anderson.

ISBN 978-0073380247

101. Digital Image Processing (3rd Edition) by Rafael C. Gonzalez – Richard E. Woods.

ISBN 978-0131687288

102. Electrical Machines, Drives and Power Systems (6th Edition) by Theodore Wildi.

ISBN 978-0131776913

103. LogixPro PLC Lab Manual w/ CD-ROM by Frank Petruzella.

ISBN 978-0077477998

104. Digital Signal Processing (4th Edition) by John G. Proakis – Dimitris K Manolakis.

ISBN 978-0131873742

105. Fundamentals of Power Electronics by Robert W. Erickson – Dragan Maksimovic.

ISBN 978-0792372707

106. Electronic Devices (Conventional Current Version) (9th Edition) by Thomas L. Floyd.

ISBN 978-0132549868

107. Essential MATLAB for Engineers and Scientists, Fifth Edition by Brian Hahn – Daniel T. Valentine Ph.D..

ISBN 978-0123943989

108. Making Things Move DIY Mechanisms for Inventors, Hobbyists, and Artists by Dustyn Roberts.

ISBN 978-0071741675

109. Modern Electronic Communication (9th Edition) by Jeffrey S. Beasley – Gary M. Miller.

ISBN 978-0132251136

110. Systems Engineering Principles and Practice by Alexander Kossiakoff – William N. Sweet – Samuel J. Seymour – Steven M. Biemer.

ISBN 978-0470405482

111. Electric Machinery and Power System Fundamentals by Stephen J. Chapman.

ISBN 978-0072291353

112. Computer Organization and Design, Fourth Edition: The Hardware/Software Interface (The Morgan Kaufmann Series in Computer Architecture and Design) by David A. Patterson – John L. Hennessy.

ISBN 978-0123744937

113. An Introduction to Semiconductor Devices by Donald A Neamen.

ISBN 978-0072987560

114. Electronic Devices and Circuit Theory (11th Edition) by Robert L. Boylestad – Louis Nashelsky.

ISBN 978-0132622264

115. Semiconductor Device Fundamentals by Robert F. Pierret.

ISBN 978-0201543933

116. Inside the Machine: Art and Invention in the Electronic Age by Megan Prelinger.

ISBN 978-0393083590

117. NFPA 70®: National Electrical Code® (NEC®), 2014 Edition by (NFPA) National Fire Protection Association.

ISBN 978-1455906734

118. Experiments in Electronics Fundamentals and Electric Circuits Fundamentals by David M. Buchla.

ISBN 978-0135063279

119. Signals and Systems: Continuous and Discrete (4th Edition) by Rodger E. Ziemer – William H Tranter – D. R. Fannin.

ISBN 978-0134964560

120. Hacking Electronics: An Illustrated DIY Guide for Makers and Hobbyists by Simon Monk Dr.

ISBN 978-0071802369

121. 001: Introduction to plasma physics and controlled fusion. Volume 1, Plasma physics by Francis F. Chen.

ISBN 978-0306413322

122. Encyclopedia of Electronic Components Volume 1: Resistors, Capacitors, Inductors, Switches, Encoders, Relays, Transistors by Charles Platt.

ISBN 978-1449333898

123. Getting Started in Electronics by Forrest M. Mims III.

ISBN 978-0945053286

124. Fabrication Engineering at the Micro- and Nanoscale (The Oxford Series in Electrical and Computer Engineering) by Stephen A. Campbell.

ISBN 978-0199861224

125. Power Electronics: Converters, Applications, and Design by Ned Mohan – Tore M. Undeland – William P. Robbins.

ISBN 978-0471226932

126. Microelectronic Circuit Design by Richard Jaeger – Travis Blalock.

ISBN 978-0073380452

127. Analog Signals and Systems by Erhan Kudeki – David C. Munson Jr..

ISBN 978-0131435063

128. Electronics Technology Fundamentals: Conventional Flow Version (3rd Edition) by Robert T. Paynter – Toby Boydell.

ISBN 978-0135048740

129. Electric Energy: An Introduction, Third Edition (Power Electronics and Applications Series) by Mohamed A. El-Sharkawi.

ISBN 978-1466503038

130. MSP 430 Microcontroller Basics by John Davies.

ISBN 978-0750682763

131. Pro Tools 101 — An Introduction to Pro Tools 10 (Book & DVD) (Avid Learning) by Frank D. Cook.

ISBN 978-1133776550

132. Linear System Theory and Design (The Oxford Series in Electrical and Computer Engineering) by Chi-Tsong Chen.

ISBN 978-0199959570

133. Raspberry Pi Cookbook by Simon Monk.

ISBN 978-1449365226

134. Laboratory Manual for Introductory Circuit Analysis (Pearson Custom Electronics Technology) by Robert L. Boylestad – Gabriel Kousourou.

ISBN 978-0135060148

135. Teach Yourself Electricity and Electronics, 5th Edition (Teach Yourself Electricity & Electronics) by Stan Gibilisco.

ISBN 978-0071741354

136. Programmable Microcontrollers with Applications: MSP430 LaunchPad with CCS and Grace by Cem Unsalan – H. Deniz Gurhan.

ISBN 978-0071830034

137. Android Phones For Dummies by Dan Gookin.

ISBN 978-1118720301

138. iPad for Artists: How to Make Great Art with Your Tablet by Dani Jones.

ISBN 978-1454707608

139. Programming Arduino Next Steps: Going Further with Sketches by Simon Monk.

ISBN 978-0071830256

140. Experiments in Basic Circuits: Theory and Applications by David M. Buchla.

ISBN 978-0135063347

141. Digital Integrated Circuits (2nd Edition) by Jan M. Rabaey – Anantha Chandrakasan – Borivoje Nikolic.

ISBN 978-0130909961

142. Make: Sensors: A Hands-On Primer for Monitoring the Real World with Arduino and Raspberry Pi by Tero Karvinen – Kimmo Karvinen – Ville Valtokari.

ISBN 978-1449368104

143. Programmable Logic Controllers: Hardware and Programming by Max Rabiee.

ISBN 978-1605259451

144. Experiments in Electric Circuits by Thomas L. Floyd – Brian Stanley.

ISBN 978-0135097281

145. The Engineering Design of Systems: Models and Methods by Dennis M. Buede.

ISBN 978-0470164020

146. Getting Started with littleBits: Prototyping and Inventing with Modular Electronics by Ayah Bdeir – Matt Richardson.

ISBN 978-1457186707

147. Digital Fundamentals with PLD Programming by Thomas L. Floyd.

ISBN 978-0131701885

148. Zero to Maker: Learn (Just Enough) to Make (Just About) Anything by David Lang.

ISBN 978-1449356439

149. Programming the Raspberry Pi: Getting Started with Python by Simon Monk.

ISBN 978-0071807838

150. RF Circuit Design: Theory & Applications (2nd Edition) by Reinhold Ludwig – Gene Bogdanov.

ISBN 978-0131471375

151. Troubleshooting and Repairing Major Appliances by Eric Kleinert.

ISBN 978-0071770187

152. Laser Electronics (3rd Edition) by Joseph T. Verdeyen.

ISBN 978-0137066667

153. DC/AC Fundamentals: A Systems Approach by Thomas L. Floyd – David M. Buchla.

ISBN 978-0132933933

154. Understanding Digital Signal Processing (3rd Edition) by Richard G. Lyons.

ISBN 978-0137027415

Engineers Bookshop

Price Comparison for Engineering Books

Electrical & Electronic Engineering Books