Category Archives: Textbooks

Military Engineering Books

1. U.S. Army Improvised Munitions Handbook by Department of the Army.

2. The Ultimate Sniper: An Advanced Training Manual for Military and Police Snipers by John L. Plaster.

3. Wired for War: The Robotics Revolution and Conflict in the 21st Century by P. W. Singer.

4. Drone University by John M. Glover.

5. Building the H Bomb: A Personal History by Kenneth W Ford.

6. Down the River (Plume) by Edward Abbey.

7. Vessel Security Officer by Joseph Ahlstrom.

8. Aerodynamics for Naval Aviators (FAA Handbooks) by Federal Aviation Administration.

9. The SKS Carbine, 5th Revised and Expanded Edition (For Collectors Only) by Steve Kehaya – Joe Poyer.

10. Defending Your Castle: Build Catapults, Crossbows, Moats, Bulletproof Shields, and More Defensive Devices to Fend Off the Invading Hordes by William Gurstelle.

11. U.S. Marine Corps Scout/Sniper Training Manual by Us Government – USMC Development Education Command Staff.

12. Face of Battle by John Keegan.

13. The Complete Idiot’s Guide to Algebra, 2nd Edition (Idiot’s Guides) by W. Michael Kelley.

14. BOMB by Steve Sheinkin.

15. M1 Carbine Owners Manual: M1, M2 & M3 .30 Caliber Carbines by Donald B. McLean.

16. NASA Space Shuttle Manual: An Insight into the Design, Construction and Operation of the NASA Space Shuttle (Haynes Owners Workshop Manuals (Hardcover)) by David Baker.

17. Weaponeering: Conventional Weapon System Effectiveness (Aiaa Education Series) by Morris R. Driels.

18. A Chorus of Stones: The Private Life of War by Susan Griffin.

19. Cities Under Siege: The New Military Urbanism by Stephen Graham.

20. Nations Have the Right to Kill: Hitler, the Holocaust and War by Richard A. Koenigsberg.

21. Marine Radionavigation and Communications by Jeffrey W Monroe.

22. Marine Officer’s Guide, 7th Edition by .

23. Stephen Biesty’s Incredible Cross-Sections by Richard Biesty Stephen; Platt.

24. EW 104: Electronic Warfare Against a New Generation of Threats (EW100) by David L. Adamy.

25. The Mosin-Nagant Rifle, 6th Edition (For collectors only) by Terence W. Lapin.

26. Semper Fidelis: History of the United States Marine Corps by Allan R. Millett.

27. Fighter Planes (Pull Ahead Books) (Pull Ahead Books (Paperback)) by Jeffrey Zuehlke.

28. Tactics (Marine Corps Doctrinal Publications MCDP 1.3) by United Stated Marine Corps..

29. Drone Wars: Transforming Conflict, Law, and Policy by .

30. The Hunt for Zero Point: Inside the Classified World of Antigravity Technology by Nick Cook.

31. The Science of War: Defense Budgeting, Military Technology, Logistics, and Combat Outcomes by Michael E. O’Hanlon.

32. North American B-25 Mitchell: The Ultimate Look: From Drawing Board to Flying Arsenal by Dr William Wolf (Mi.

33. Breechloading Carbines of the United States Civil War Period by John Pitman.

34. Warship’s Battle Damage 1: USS Hornet CV-8 by .

35. Military Small Arms of the 20th Century by Ian V Hogg.

36. Air Force Manual AFMAN 36-2203 Drill and Ceremonies by United States Government US Air Force.

37. The 448th Bomb Group (H):: Liberators Over Germany in World War II (Schiffer Military History Book) by Jeffrey E Brett.

38. Bayesian Multiple Target Tracking, Second Edition by Lawrence D Stone – Roy L Streit – Thomas L Corwin.

39. Modern Exterior Ballistics by Robert L. McCoy.

40. Search and Screening. General Principles with Historical Applications by B. O. Koopman.

41. How to Build Military Grade Suppressors by Keith Anderson.

42. Missile Design and System Engineering (AIAA Education) by Eugene L. Fleeman.

43. Physics of Direct Hit and Near Miss Warhead Technology (Progress in Astronautics and Aeronautics) by R. Lloyd.

44. Impact Dynamics by Jonas A. Zukas – Theodore Nicholas – Hallock F. Swift – Longin B. Greszczuk – Donald R. Curran.

45. Wiley Pathways Threats to Homeland Security: An All-Hazards Perspective by .

46. Hagakure: The Book of the Samurai by Yamamoto Tsunetomo – William Scott Wilson.

47. A Sailor’s History of the U.S. Navy (U.S. Naval Institute Blue and Gold Professional Library) by Thomas J. Cutler.

48. Angels Don’t Play This Haarp: Advances in Tesla Technology by Nick Begich – Jeane Manning.

49. Auxiliary Sail Vessel Operations for the Aspiring Professional Sailor by G Andy Chase.

50. Tactical Genius in Battle by Simon Goodenough – Len Deighton.

51. The Corrected and Updated Anarchist Cookbook by Yogi Shan.

52. The Bluejackets’ Manual by Bill Wedertz.

53. Eagle and Sword: The Federalists and the Creation of the Military Establishment in America, 1783-1802 by Richard H. Kohn.

54. Navy EVAL and FITREP Writing Guide by .

55. U.S. Army Map Reading and Land Navigation Handbook – Illustrated (U.S. Army) by Department of the Army.

56. Concise 33 Strategies of War, The by Robert Greene.

57. Designing Soldier Systems: Current Issues in Human Factors (Human Factors in Defence) by John Martin – Laurel Allender.

58. Hands to Flying Stations: v. 1: Recollective History of Canadian Naval Aviation, 1945-1954 by Stuart E. Soward.

59. Sea Wings: Pictorial History of the Royal Canadian Fleet Air Arm by J.A. Foster.

60. Why the Germans Lose at War: The Myth of German Military Superiority by Kenneth Macksey.

61. Born Fearless by Phil Campion.

62. Aquatic Chemistry: Chemical Equilibria and Rates in Natural Waters by Werner Stumm – James J. Morgan.

63. Rear Gunner Pathfinder by Ron Smith.

64. Army Field Manual FM 22-100 (The U.S. Army Leadership Field Manual) by The United States Army.

65. U.S. Army Improvised Munitions Handbook by Department of the Army.

66. Earth Rising II: The Betrayal of Science, Society and the Soul by Dr Nick Begich – James Roderick.

67. The New Soldier by John Kerry – Vietnam Veterans Against The War.

68. C-47 Skytrain in action – Aircraft No. 149 by Larry Davis.

69. Crisis in command: Mismanagement in the Army by Richard A Gabriel.

70. Flying Wings of the Horten Brothers: (Schiffer Military/Aviation History) by H.P. Dabrowski.

71. The Infantry Rifle and Platoon Squad: The Official U.S. Army Field Manual FM 3-21.8 (FM 7-8), 28 March 2007 revision by U.S. Department of the Army – U.S. Army Infantry School.

72. The Cutting Edge by C. J. Heatley III.

73. Introduction to UAV Systems by Paul Fahlstrom – Thomas Gleason.

74. Game Theory and National Security by Steven Brams – D. Marc Kilgour.

75. The Naval Institute Guide to Naval Writing by Robert Shenk.

76. Advances in Military Textiles and Personal Equipment (Woodhead Publishing Series in Textiles) by .

77. On the Psychology of Military Incompetence by Norman Dixon.

78. Project: Soul Catcher: Secrets of Cyber and Cybernetic Warfare Revealed by Robert Duncan.

79. Theory of the Partisan: Intermediate Commentary on the Concept of the Political by Carl Schmitt.

80. Basic Electronics by Gene McWhorter – Alvis J. Evans.

81. Dictionary of Military Abbreviations by Norman Polmar – Eric Wertheim – Mark Warren.

82. First Battle of Marne (Battles That Changed the World) by Earle, Jr. Rice.

83. U.S. Army Guide to Rigging (US Army Survival) by Army.

84. The Preparatory Manual of Chemical Warfare Agents Third Edition by Jared Ledgard.

Electric Machinery & Motors Engineering Books

1. Electrical Motor Controls for Integrated Systems by Gary Rockis – Glen A. Mazur.

2. Electrical Machines, Drives and Power Systems (6th Edition) by Theodore Wildi.

3. Electric Machinery and Power System Fundamentals by Stephen Chapman.

4. Electrical Motor Controls for Integrated Systems Workbook by Gary Rockis – Glen A. Mazur.

5. Principles of Electric Machines and Power Electronics by P. C. Sen.

6. Electric Machines: Theory, Operating Applications, and Controls (2nd Edition) by Charles I. Hubert.

7. Robotics, Vision and Control: Fundamental Algorithms in MATLAB (Springer Tracts in Advanced Robotics) by Peter Corke.

8. Electricity for the Trades (Engineering Technologies & the Trades) by Frank Petruzella.

9. Principles of Electric Machines and Power Electronics, Second Edition by Paresh C. Sen.

10. Electric Motor Control by Stephen Herman.

11. Industrial Motor Control by Stephen Herman.

12. Electromechanical Motion Devices by Paul Krause – Oleg Wasynczuk – Steven D. Pekarek.

13. Marine Diesel Engines: Maintenance, Troubleshooting, and Repair (International Marine-RMP) by Nigel Calder.

14. Electrical Transformers and Rotating Machines by Stephen L. Herman.

15. Schaum’s Outline of Electric Machines & Electromechanics by Syed A. Nasar.

16. Electric Motors and Drives: Fundamentals, Types and Applications, 4th Edition by Austin Hughes – Bill Drury.

17. Electric Machines: Steady-State Theory and Dynamic Performance by Mulukutla S. Sarma.

18. Electric and Hybrid Vehicles: Design Fundamentals, Second Edition by Iqbal Husain.

19. Electric Motors and Control Systems by Frank Petruzella.

20. Electric Machines and Drives by Ned Mohan.

21. Electricity 4: AC/DC Motors, Controls, and Maintenance by Jeffrey J. Keljik.

22. Understanding Motor Controls by Stephen L. Herman.

23. Control of Induction Motors (Engineering) by Andrzej M. Trzynadlowski.

24. Modern Industrial Electrical Motor Controls: Operation, Installation and Troubleshooting by Thomas E. Kissell.

25. Workbook and Lab Manual for Herman’s Industrial Motor Control, 7th by Stephen Herman.

26. Nuclear Principles in Engineering by Tatjana Jevremovic.

27. Airstream Living by Bruce Littlefield.

28. Two-Stroke Engine Repair and Maintenance (Mechanical Engineering) by Paul Dempsey.

29. Unscrewed: Salvage and Reuse Motors, Gears, Switches, and More from Your Old Electronics by Ed Sobey.

30. Electric Machinery and Transformers (The Oxford Series in Electrical and Computer Engineering) by Bhag S. Guru – Huseyin R. Hiziroglu.

31. Electrical Control for Machines by Diane Lobsiger.

32. Electrical Control for Machines, 6E by Peter R. Giuliani – Leo Chartrand – Kenneth Rexford.

33. Power Electronics in Motor Drives: Principles, Application and Design by Martin Brown.

34. Electric Motors and Control Systems (Engineering Technologies & the Trades) by Frank Petruzella.

35. Build Your Own Electric Vehicle by Bob Brant.

36. Industrial Electronics: Applications for Programmable Controllers, Instrumentation and Process Control, and Electrical Machines and Motor Controls (3rd Edition) by Thomas E. Kissell.

37. Machine Tool Practices (7th Edition) by Richard R. Kibbe – Roland O. Meyer – Warren T. White – John E. Neely.

38. Troubleshooting Electric Motors by Glen A. Mazur – Thomas E. Proctor.

39. General Theory of Electrical Machines by A. T. Morgan.

40. Electric Machinery by Peter F. Ryff.

41. Electricity & Electronics For Industrial Maintenance by Thomas E. Kissell.

42. BMW Z3, M Coupe & Roadster 1996-2002 Gold Portfolio by R.M. Clarke.

43. Ford Shop Manual Series 2N 8N & 9N by IT Shop Service.

44. Design of Rotating Electrical Machines by Juha Pyrhonen – Tapani Jokinen – Valeria Hrabovcova.

45. Electric Motor Maintenance and Troubleshooting, 2nd Edition (Electronics) by Augie Hand.

46. CNC Handbook (Mechanical Engineering) by Hans Kief – Helmut Roschiwal.

47. Robotics: Modelling, Planning and Control (Advanced Textbooks in Control and Signal Processing) by Bruno Siciliano – Lorenzo Sciavicco – Luigi Villani – Giuseppe Oriolo.

48. Electric and Hybrid Vehicles: Design Fundamentals by Iqbal Husain.

49. Running Small Motors with PIC Microcontrollers (Electronics) by Harprit Sandhu.

50. Principles of Electric Machines and Power Electronics by P. C. Sen.

51. The Earthmover Encyclopedia: The Complete Guide to Heavy Equipment of the World by Keith Haddock.

52. Electromechanical Energy Devices and Power Systems by Zia A. Yamayee – Juan L. Bala.

53. The Complete Idiot’s Guide to RVing, 2nd Edition by Brent Peterson.

54. Industrial Electricity and Motor Controls, Second Edition (P/L Custom Scoring Survey) by Rex Miller – Mark Miller.

55. Electrical Motor Controls by Gary Rockis – Glen Mazur.

56. Electrical Motor Controls for Integrated Systems: Third Edition by Gary J. Rockis – Glenn A. Mazur.

57. Automotive Technology: For General Service Technicians by Ronald G Haefner – Paul Leathers.

58. Activities Manual for Electric Motors and Control Systems w/ Constructor CD by Frank Petruzella.

59. Linear Synchronous Motors: Transportation and Automation Systems, Second Edition (Electric Power Engineering Series) by Jacek F. Gieras – Zbigniew J. Piech – Bronislaw Tomczuk.

60. Transformers and Motors: A Single-Source Reference for Electricians by George Patrick Shultz.

61. Electric Motors and Control Systems by Frank Petruzella.

62. Technician’s Guide to the 68HC11 Microcontroller by Dan Black – Leo Chartrand.

63. Car Audio For Dummies by Doug Newcomb.

64. ASE Transit Bus Technician Certification H6: Electrical/Electronic Systems (ASE Test Preparation Series) by Cengage Learning Delmar.

65. Electric Motor Drive Installation And Troubleshooting by Cch Editorial Staff Publication – William J. Weindorf.

66. Operating, Testing, and Preventive Maintenance of Electrical Power Apparatus by Charles I. Hubert.

67. Electrical Power by Joe Kaiser.

68. Principles of Electric Machines and Power Electronics by P. C. Sen.

69. ASE Test Preparation – Transit Bus H2, Diesel Engines (ASE Test Preparation Series) by Cengage Learning Delmar.

70. Electrical Machines, Drives, and Power Systems (5th Edition) by Theodore Wildi.

71. Digital Signal Processing for In-Vehicle Systems and Safety by .

72. Modern Power Electronics and AC Drives by Bimal K. Bose.

73. Electrical Power and Controls (2nd Edition) by Timothy L. Skvarenina – William E. DeWitt.

74. Vector Control and Dynamics of AC Drives (Monographs in Electrical and Electronic Engineering) by D. W. Novotny – T. A. Lipo.

75. Ford Shop Manual Models3230 3430 3930 4630+ (I & T Shop Service Manuals) by Penton Staff.

76. Power Electronics: Circuits, Devices and Applications (3rd Edition) by Muhammad H. Rashid.

77. Industrial Motor Control, 6th Edition by Stephen L. Herman.

78. Electric Motors and Control Techniques (Electronics) by Irving Gottlieb.

79. Electric Machines (Electric Power Engineering Series) by Charles A. Gross.

80. Alternative Energy Systems: Design and Analysis with Induction Generators, Second Edition (Power Electronics and Applications Series) by M. Godoy Simões – Felix A. Farret.

81. Micro-Hydro Design Manual: A Guide to Small-Scale Water Power Schemes by Adam Harvey – Andy Brown.

82. Semiconductor Design And Implementation Issues In Integrated Vehicle Electronics by John H. Hall.

83. Electric Machinery (2nd Edition) by Peter F. Ryff.

84. Motorola MC68000 Microprocessor Family: Assembly Language Interface Design and System Design, The (2nd Edition) by Thomas L. Harman.

85. How to Buy an RV and Save Thousands – 4th Edition by Don Wright.

86. The Traveling Fair: Fairground Transport in Britain by Malcolm Slater.

87. Introduction to Electric Circuits and Machines by Colin D. Simpson.

88. Electronic Variable Speed Drives by Michael E. Brumbach.

89. The Allis-Chalmers Story: Classic American Tractors by C.H. Wendel.

90. Sorensen’s Guide to Powerboats, 2/E by Eric Sorensen.

Economics Engineering Books

1. Engineering Economic Analysis by Donald G. Newnan – Jerome P. Lavelle – Ted G. Eschenbach.

2. Engineering Economy (16th Edition) – Standalone book by William G. Sullivan – Elin M. Wicks – C. Patrick Koelling.

3. Fundamentals of Engineering Economics (3rd Edition) by Chan S. Park.

4. Engineering Economy (Irwin Industrial Engineering) by Leland Blank – Anthony Tarquin.

5. Basics of Engineering Economy (Irwin Industrial Engineering) by Leland Blank – Anthony Tarquin.

6. Chemical Engineering Design, Second Edition: Principles, Practice and Economics of Plant and Process Design by Gavin Towler Ph.D. – R K Sinnott.

7. Engineering Economic Analysis by Donald Newnan – Ted Eschenbach – Jerome Lavelle.

8. Schaum’s Outline of Engineering Economics by Jose Sepulveda.

9. Contemporary Engineering Economics (5th Edition) by Chan S. Park.

10. Fundamentals of Engineering Economic Analysis by John A. White – Kellie S. Grasman – Kenneth E. Case – Kim LaScola Needy – David B. Pratt.

11. Contemporary Engineering Economics, 5th Edition by Chan S. Park.

12. Engineering Economy (15th Edition) by William G. Sullivan – Elin M. Wicks – C. Patrick Koelling.

13. Cost Analysis and Estimating for Engineering and Management by Phillip F. Ostwald – Timothy S. McLaren Ph.D..

14. Engineering Economy by William G. Sullivan – Elin M. Wicks – James Luxhoj.

15. Principles of Engineering Economic Analysis by John A. White – Kenneth E. Case – David B. Pratt.

16. Engineering Economy Plus NEW MyEngineeringLab with Pearson eText — Access Card Package (16th Edition) by Sullivan – William G.; Wicks – Elin M.; Koelling – C. Patrick.

17. Engineering Economy: Applying Theory to Practice, 3rd Edition by Ted G. Eschenbach.

18. Engineering Economy by Leland Blank – Anthony Tarquin.

19. Civil and Environmental Systems Engineering (2nd Edition) by Charles S. Revelle – Earl Whitlatch – Jeff Wright.

20. Engineering Economic and Cost Analysis (3rd Edition) by Courtland A. Collier – Charles R. Glagola.

21. Engineering Economic Analysis by Donald Newnan – Jerome Lavelle – Ted Eschenbach.

22. Contemporary Engineering Economics (6th Edition) by Chan S. Park.

23. Engineering Economy [Softcover] by Leland Blank – Anthony Tarquin.

24. Basics of Engineering Economy by Leland Blank – Anthony Tarquin.

25. Public Infrastructure Asset Management, Second Edition (P/L Custom Scoring Survey) by Waheed Uddin – W. Hudson – Ralph Haas.

26. Plant Design and Economics for Chemical Engineers (McGraw-Hill Chemical Engineering) by Max S. Peters – Klaus D. Timmerhaus – Ronald E. West.

27. Energy and the Wealth of Nations: Understanding the Biophysical Economy by Charles A. S. Hall – Kent A. Klitgaard.

28. Engineering Economy by G. J. Thuesen – Wolter J. Fabrycky.

29. Engineering Economy by Leland Blank – Anthony Tarquin.

30. Engineering Economy (9th Edition) by Gerald J. Thuesen – W.J. Fabrycky.

31. Fundamentals of Engineering Economic Analysis by John A. White – Kellie S. Grasman – Kenneth E. Case – Kim LaScola Needy – David B. Pratt.

32. Manufacturing Systems Modeling and Analysis by Guy L. Curry – Richard M. Feldman.

33. Basics of Engineering Economy by Blank.

34. Logistics Systems Analysis by Carlos F. Daganzo.

35. Fundamentals of Engineering Economics (2nd Edition) by Chan S. Park.

36. Civil and Environmental Systems Engineering by Charles S. Revelle – E. Earl, Jr Whitlatch – Jeff R. Wright – Earl Whitlatch – Jeff Wright – Elbert E. Whitlatch – J. R. Wright.

37. The Theory and Practice of Revenue Management (International Series in Operations Research & Management Science) by Kalyan T. Talluri – Garrett J. van Ryzin.

38. Linear Programming and Generalizations: A Problem-based Introduction with Spreadsheets (International Series in Operations Research & Management Science) by Eric V. Denardo.

39. The Theory and Practice of Revenue Management (International Series in Operations Research & Management Science) by Kalyan T. Talluri – Garrett J. van Ryzin.

40. Linear Programming: Foundations and Extensions (International Series in Operations Research & Management Science) by Robert J Vanderbei.

41. Advances in Sustainable Manufacturing by .

42. Contemporary Engineering Economics Plus MyEngineeringLab with eText — Access Card Package (6th Edition) by Chan S. Park.

43. Engineering Economy by NA.

44. Engineering Economy by Leland T. Blank – Anthony Tarquin.

45. Logistics Engineering & Management 6th Economy Edition by Benjamin S. Blanchard.

46. Engineering Economic Analysis: An Introduction by Michael R. Lindeburg PE.

47. Engineering Economy (13th Edition) by William G Sullivan – Elin M Wicks – James Luxhoj.

48. Engineering Economic Analysis by Donald G. Newnan.

49. Principles of Engineering Economic Analysis by John A. White – Kenneth E. Case – David B. Pratt.

50. Energy and American Society Thirteen Myths by .

51. Engineering Economy (16th Edition) – Standalone book by William G. Sullivan – Elin M. Wicks – C. Patrick Koelling.

52. Engineering Economy (14th Edition) by William G. Sullivan – Elin M. Wicks – C. Patrick Koelling.

53. Value Analysis Tear-Down by Jerry Kaufman.

54. Engineering Economic Analysis by Donald G. Newnan – Ted G. Eschenbach – Jerome P. Lavelle.

55. Lean for Systems Engineering with Lean Enablers for Systems Engineering by Bohdan W. Oppenheim.

56. Contemporary Engineering Economics (4th Edition) by Chan S. Park.

57. Economic and Financial Analysis for Engineering and Project Management by Abol Ardalan.

58. Principles of Engineering Economic Analysis by John A. White – Kenneth E. Case – David B. Pratt.

59. Basics of Engineering Economy (Irwin Industrial Engineering) by Leland Blank – Anthony Tarquin.

60. Chemical Engineering Design: Principles, Practice and Economics of Plant and Process Design by Gavin Towler Ph.D. – R K Sinnott.

61. Capital Investment Analysis for Engineering and Management (2nd Edition) by John R. Canada – William G. Sullivan – John A. White.

62. Applied Probability and Stochastic Processes by Richard M. Feldman – Ciriaco Valdez-Flores.

63. Engineering Economy by Sullivan / De Garmo / Canada.

64. Applied Economic Analysis for Technologists, Engineers, and Managers (2nd Edition) by Michael S. Bowman.

65. Logistics Systems Analysis by Carlos F. Daganzo.

66. Cases in Engineering Economy by William R Peterson – Ted G Eschenbach.

67. Engineering Economics, MIME 2600, University of Toledo by .

68. Modelling and Control of Robot Manipulators (Advanced Textbooks in Control and Signal Processing) by Lorenzo Sciavicco – Bruno Siciliano.

69. Engineering Economy and the Decision-Making Process by Joseph C. Hartman.

70. Fundamentals of Engineering Economics (3rd Edition) by Chan S. Park.

71. Systems Life Cycle Costing: Economic Analysis, Estimation, and Management (Engineering Management) by John V. Farr.

72. NEW MyEngineeringLab with Pearson eText — Access Card — Engineering Economy by William G. Sullivan – Elin M. Wicks – C. Patrick Koelling.

73. Drilling Down: The Gulf Oil Debacle and Our Energy Dilemma by Joseph A. Tainter – Tadeusz W. Patzek.

74. Solutions Manual for Engineering Economy: Applying Theory to Practice by Ted Eschenbach.

75. Plug In Electric Vehicles in Smart Grids: Charging Strategies (Power Systems) by .

76. Fundamentals of Economics for Engineering Technologists and Engineers by S. Kant Vajpayee.

77. Handbook of Bioenergy: Bioenergy Supply Chain – Models and Applications (Energy Systems) by .

78. Cost Management for Today’s Advanced Manufacturing: The CAM-I Conceptual Design by .

79. Location Theory and Decision Analysis: Analytics of Spatial Information Technology by Yupo Chan.

80. Estimating Software Costs: Bringing Realism to Estimating (Programming & Web Dev – OMG) by Capers Jones.

81. Engineering Economy by Leland T Blank – Anthony Tarquin – Leland Blank.

82. Proactive Intelligence: The Successful Executive’s Guide to Intelligence by John J. McGonagle – Carolyn M. Vella.

83. Architecting the Internet of Things by .

84. The Handbook of Service Innovation by .

85. Linear and Nonlinear Programming (International Series in Operations Research & Management Science) by David G. Luenberger – Yinyu Ye.

86. Environmental Systems Engineering and Economics by Robert Willis – Brad A. Finney.

87. Integrated Occupational Safety and Health Management: Solutions and Industrial Cases by .

88. Electricity Economics: Regulation and Deregulation by Geoffrey Rothwell – Tomás Gómez.

89. The Wheels That Drove New York: A History of the New York City Transit System (Springer Tracts on Transportation and Traffic) by Roger P. Roess – Gene Sansone.

90. Multiagent Coordination Enabling Autonomous Logistics by Arne Schuldt.

91. Advanced Engineering Economics by Chan S. Park – Gunter P. Sharp-Bette.

Polymers Engineering Books

1. Swatch Reference Guide for Fashion Fabrics by Deborah Young.

2. Textiles (11th Edition) by Sara J. Kadolph.

3. Introduction to the Thermodynamics of Materials by David R. Gaskell.

4. Introduction to Polymers, Third Edition by Robert J. Young – Peter A. Lovell.

5. The Art of Writing Reasonable Organic Reaction Mechanisms by Robert B. Grossman.

6. Global Sourcing in the Textile and Apparel Industry (Fashion) by Jung E. Ha-Brookshire.

7. Thermodynamics in Materials Science, Second Edition by Robert DeHoff.

8. Advanced Mechanics of Materials by Arthur P. Boresi – Richard J. Schmidt.

9. Textiles: Basics (Fashion Series) by Sara J. Kadolph.

10. Quality Assurance for Textiles and Apparel 2nd Edition by Sara J. Kadolph.

11. Textile Testing and Analysis by Billie J. Collier – Helen H. Epps.

12. Wills’ Mineral Processing Technology, Seventh Edition: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery by Barry A. Wills.

13. Polymer Chemistry: An Introduction by Malcolm P. Stevens.

14. Modern Ceramic Engineering: Properties, Processing, and Use in Design, 3rd Edition (Materials Engineering) by David W. Richerson.

15. Advanced Mechanics of Materials (2nd Edition) by Robert Cook – Warren Young.

16. Sewing for the Apparel Industry (2nd Edition) (Fashion Series) by Claire Shaeffer.

17. Industrial Plastics: Theory and Applications by Erik Lokensgard.

18. Polymer Science and Technology (3rd Edition) by Joel R. Fried.

19. Plastics: Materials and Processing (3rd Edition) by A. Brent Strong.

20. Fundamentals of Polymer Science: An Introductory Text by Michael M. Coleman – Paul C. Painter.

21. Understanding Textiles (6th Edition) by Billie J. Collier – Phyllis G. Tortora.

22. Apparel Product Development, 2nd Edition by Maurice J. Johnson – Evelyn C. Moore.

23. Principles of Polymerization by George Odian.

24. Polymer Physics (Chemistry) by M. Rubinstein – Ralph H. Colby.

25. Mechanics of Solid Polymers: Theory and Computational Modeling (Plastics Design Library) by Jorgen S Bergstrom.

26. Make: 3D Printing: The Essential Guide to 3D Printers by .

27. Smart Structures: Analysis and Design by A. V. Srinivasan – D. Michael McFarland.

28. Mechanical Metallurgy by George Dieter.

29. Schaum’s Outline Of Statics and Mechanics of Materials by William A. Nash.

30. Computational Intelligence in Design and Manufacturing by Andrew Kusiak.

31. Painter and Coleman on Polymers by Paul C. Painter – Michael Coleman.

32. Polymer Processing: Principles and Design by Donald G. Baird – Dimitris I. Collias.

33. Plastics Packaging 2E: ‘Properties, Processing, Applications and Regulations by Susan Selke – John Culter – Ruben Hernandez.

34. Principles of Polymer Engineering by N. G. McCrum – C. P. Buckley – C. B. Bucknall.

35. An Introduction to Materials Engineering and Science for Chemical and Materials Engineers by Brian S. Mitchell.

36. Construction Principles, Materials, and Methods by H. Leslie Simmons.

37. Mechanics Of Composite Materials (Materials Science & Engineering Series) by Robert M. Jones.

38. Introduction to Nanoscale Science and Technology (Nanostructure Science and Technology) by .

39. Bread and Roses: Mills, Migrants, and the Struggle for the American Dream by Bruce Watson.

40. Structure and Properties of Engineering Alloys by William F. Smith.

41. Principles of Polymer Systems, Sixth Edition by Ferdinand Rodriguez – Claude Cohen – Christopher K. Ober – Lynden Archer.

42. Bread and Roses: Mills, Migrants, and the Struggle for the American Dream by Bruce Watson.

43. Polymers: Chemistry and Physics of Modern Materials, Third Edition by J.M.G. Cowie – Valeria Arrighi.

44. Failure Analysis of Engineering Materials by Charles Brooks – Ashok Choudhury – Charlie R. Brooks.

45. Going Global: The Textiles And Apparel Industry by Grace I. Kunz – Myrna B. Garner.

46. Schaum’s Outline of Statics and Strength of Materials (Schaum’s) by John Jackson – Harold Wirtz.

47. Fabric for the Designed Interior by Frank Theodore Koe.

48. Composites Manufacturing: Materials, Product, and Process Engineering by Sanjay Mazumdar.

49. Polymer Chemistry, Second Edition by Paul C. Hiemenz – Timothy P. Lodge.

50. Introduction to Nanoscience by Gabor L. Hornyak – Joydeep Dutta – H.F. Tibbals – Anil Rao.

51. Textiles (10th Edition) by Sara J. Kadolph – Anna L. Langford.

52. Plastic: A Toxic Love Story by Susan Freinkel.

53. Injection Molding Handbook – 2 Volume Set by D.V. Rosato – Marlene G. Rosato.

54. Foundations of Organic Chemistry (Oxford Chemistry Primers) by Michael Hornby – Josephine Peach.

55. Materials Chemistry by Bradley Fahlman.

56. Principles of Ceramics Processing, 2nd Edition by James S. Reed.

57. Introduction to Synthetic Polymers by Ian M. Campbell.

58. 3D CAD with Autodesk 123D: Designing for 3D Printing, Laser Cutting, and Personal Fabrication by Jesse Harrington Au – Emily Gertz.

59. The Elements of Polymer Science and Engineering, Third Edition by Alfred Rudin – Phillip Choi Ph.D. P.Eng.

60. Finite Element Analysis for Engineers by Frank Rieg – Reinhard Hackenschmidt – Bettina Alber-Laukant.

61. Polymer Synthesis and Characterization: A Laboratory Manual by Stanley R. Sandler – Wolf Karo – JoAnne Bonesteel – Eli M. Pearce.

62. The Course of Industrial Decline: The Boott Cotton Mills of Lowell, Massachusetts, 1835-1955 (Johns Hopkins Studies in the History of Technology) by Laurence F. Gross.

63. Cotton: The Biography of a Revolutionary Fiber by Stephen Yafa.

64. Multifunctional Polymer Nanocomposites by .

65. Homer on Life and Death (Clarendon Press Paperbacks) by Jasper Griffin.

66. The Root of Wild Madder: Chasing the History, Mystery, and Lore of the Persian Carpet by Brian Murphy.

67. Girls of the Factory: A Year with the Garment Workers of Morocco by M. Laetitia Cairoli.

68. Textiles: Basics and TFC Swatch Kit by Sara J. Kadolph.

69. Global Sourcing in the Textile and Apparel Industry (Fashion) by Jung E. Ha-Brookshire.

70. Essentials of Polymer Science and Engineering by Paul C. Painter – Michael M. Coleman.

71. Heat Treatment, Selection, and Application of Tool Steels 2E by William E. Bryson.

72. Make: 3D Printing: The Essential Guide to 3D Printers by .

73. Prehistoric, Ancient Near Eastern & Aegean Textiles and Dress: An Interdisciplinary Anthology (Ancient Textiles) by .

74. Understanding Polymer Processing: Processes and Governing Equations by Tim Osswald.

75. Global Textile Encounters (Ancient Textiles) by .

76. Principles of Polymer Chemistry (The George Fisher Baker Non-Resident Lectureship in Chemistry at Cornell University) by Paul J. Flory.

77. Metalworking Fluids, Second Edition (Manufacturing Engineering and Materials Processing) by .

78. Introduction to Polymers, 2nd Edition by Robert J. Young – Peter A. Lovell.

79. Silk for the Vikings (Ancient Textiles) by Marianne Vedeler.

80. Nanotechnology: Basic Science and Emerging Technologies by Mick Wilson – Kamali Kannangara – Geoff Smith – Michelle Simmons – Burkhard Raguse.

81. Mechanical Response of Polymers: An Introduction by Alan S. Wineman – K. R. Rajagopal.

82. Plastic Products Recycling: Technology and Market Trends (Rapra Industry Analysis Report) by Sara Hulse.

83. Principles of Composite Material Mechanics, Second Edition (Mechanical Engineering) by Ronald F. Gibson.

84. Protect Your Garden: Eco-Friendly Solutions for Healthy Plants by Ed Rosenthal.

85. Silicones and Industry by Andreas Tomanek.

86. Electrical Properties of Polymers by Evaristo Riande – Ricardo Diaz-Calleja.

87. Plastics Additives: An A-Z reference (Polymer Science and Technology Series) by Geoffrey Pritchard.

88. Physical Properties of Polymers Handbook by .

89. Polyurethanes by Ulrich Meier-Westhues.

90. Horsehair: A Textile Resource by Marjorie Congram.

91. Smart Structures: Analysis and Design by A. V. Srinivasan – D. Michael McFarland.

92. A Perfect Red: Empire, Espionage, and the Quest for the Color of Desire by Amy Butler Greenfield.

93. Thermoplastic Melt Rheology and Processing (Plastics Engineering) by Aroon Shenoy.

94. Advances in Military Textiles and Personal Equipment (Woodhead Publishing Series in Textiles) by .

95. Polymer Science and Technology (2nd Edition) by Joel R. Fried.

96. Design Data for Plastics Engineers by Natti S Rao – Keith T O’Brien.

97. Electronic Properties of Materials by Rolf E. Hummel.

98. Introduction to the Thermodynamics of Materials, 4th Edition by David R. Gaskell – David E. Laughlin.

99. Introduction to Polymers by Robert J. Young – P. A. Lovell.

Radio and Wireless Engineering Books

1. Thunderstruck by Erik Larson.

2. Communication Technology Update and Fundamentals by .

3. The Broadcast Century and Beyond: A Biography of American Broadcasting by Robert L Hilliard – Michael C Keith.

4. Ham Radio For Dummies by H. Ward Silver.

5. Sound Reporting: The NPR Guide to Audio Journalism and Production by Jonathan Kern.

6. Help Me! Guide to iPhone 6: Step-by-Step User Guide for the iPhone 6 and iPhone 6 Plus by Charles Hughes.

7. The ARRL General Class License Manual Spiral Bound by ARRL Inc..

8. The ARRL Extra Class License Manual (Arrl Extra Class License Manual for the Radio Amateur) by Ward Silver.

9. Ratings Analysis: Audience Measurement and Analytics (Routledge Communication Series) by James G. Webster – Patricia F. Phalen – Lawrence W. Lichty.

10. RF Circuit Design: Theory & Applications (2nd Edition) by Reinhold Ludwig – Gene Bogdanov.

11. Teach Yourself VISUALLY iPhone: Covers iOS 8 on iPhone 6, iPhone 6 Plus, iPhone 5s, and iPhone 5c (Teach Yourself VISUALLY (Tech)) by Guy Hart-Davis.

12. Keith’s Radio Station: Broadcast, Internet, and Satellite by John Allen Hendricks – Bruce Mims.

13. Thunderstruck by Erik Larson.

14. World Radio TV Handbook 2015: The Directory of Global Broadcasting by WRTH Editors.

15. Guide to Wireless Communications by Jorge Olenewa.

16. Practical Mobile Forensics by Satish Bommisetty – Rohit Tamma – Heather Mahalik.

17. The ARRL General Class License Manual (Arrl General Class License Manual for the Radio Amateur) by ARRL Inc..

18. Mobile Communications (2nd Edition) by Jochen Schiller.

19. Arduino Projects for Amateur Radio by Jack Purdum – Dennis Kidder.

20. The Electronics of Radio by David Rutledge.

21. Electronic Media Management by Peter Pringle – Michael F Starr.

22. Wireless Communications by Andreas F. Molisch.

23. Build Your Own Transistor Radios: A Hobbyist’s Guide to High-Performance and Low-Powered Radio Circuits by Ronald Quan.

24. Understanding Basic Electronics (Softcover) by ARRL Inc. – Walter Banzhaf WB1ANE.

25. Basic Antennas by ARRL Inc..

26. Digital Radio Production, Second Edition by Donald W. Connelly.

27. The Broadcast Century and Beyond: A Biography of American Broadcasting by Robert L Hilliard – Michael C Keith.

28. Quick Study for Your Technician Class Amateur Radio License: Valid 2014-2018 by Aleksandra Rohde.

29. CWDP Certified Wireless Design Professional Official Study Guide: Exam PW0-250 by Shawn M. Jackman – Matt Swartz – Marcus Burton – Thomas W. Head.

30. General Class License Manual (Arrl General Class License Manual for the Radio Amateur) by ARRL Inc..

31. No-Nonsense General Class License Study Guide: (for tests given between July 2015 and June 2019) by Dan Romanchik KB6NU.

32. Ratings Analysis: Audience Measurement and Analytics (Routledge Communication Series) by James G. Webster – Patricia F. Phalen – Lawrence W. Lichty.

33. Small Antenna Design (Communications Engineering (Paperback)) by Douglas B. Miron.

34. LTE-Advanced: A Practical Systems Approach to Understanding 3GPP LTE Releases 10 and 11 Radio Access Technologies by Sassan Ahmadi.

35. Marine Radionavigation and Communications by Jeffrey W Monroe – Jeffrey W Monroe – Thomas L Bushy.

36. Spychips: How Major Corporations and Government Plan to Track Your Every Move with RFID by Katherine Albrecht – Liz McIntyre.

37. The Radio Station: Broadcast, Satellite & Internet by Michael C Keith.

38. Guide to Wireless Communications by Jorge Olenewa.

39. ARRL Ham Radio License Manual: All You Need to Become an Amateur Radio Operator by H. Ward Silver – American Radio Relay League.

40. Ham Radio Study Guide: Manual for Technician Class, General Class, and Amateur Extra Class by Ham Radio Study Guide Team.

41. Microwave and RF Design: A Systems Approach by Michael Steer.

42. An Introduction to Radio Frequency Engineering by Christopher Coleman.

43. ARRL’s Wire Antenna Classics by ARRL Inc..

44. Radios to Go! by ARRL Inc. – Steve Ford WB8IMY.

45. DIY Comms and Control for Amateur Space: Talking and Listening to Your Satellite by Sandy Antunes.

46. Multiple-Target Tracking with Radar Applications (Artech House Radar Library) (Artech House Radar Library (Hardcover)) by Samuel S. Blackman.

47. Radio Frequency Interference Pocket Guide (Electromagnetics and Radar) by Kenneth Wyatt – Michael Gruber.

48. The ARRL Repeater Directory 2015/2016 Desktop Edition by ARRL Inc..

49. Nifty E-Z Guide To Psk31 Operation by Bernie Lafreniere.

50. Ham and Shortwave Radio for the Electronics Hobbyist by Stan Gibilisco.

51. A Broadcast Engineering Tutorial for Non-Engineers by Graham Jones.

52. The Radio Amateur’s Hand Book by A. Frederick Collins.

53. Nifty E-Z Guide to D-STAR Operation by Bernie Lafreniere.

54. by .
ISBN 

55. The iPhone Book: Covers iPhone 5, iPhone 4S, and iPhone 4 (6th Edition) by Scott Kelby – Terry White.

56. RF and Microwave Engineering: Fundamentals of Wireless Communications by Frank Gustrau.

57. Software Receiver Design: Build your Own Digital Communication System in Five Easy Steps by C. Richard Johnson Jr – William A. Sethares – Andrew G. Klein.

58. An introduction to HF Software Defined Radio: SDR for Amateur Radio Operators by Andrew Barron ZL3DW.

59. Morse Code Operating for Amateur Radio by ARRL Inc..

60. 4G: LTE/LTE-Advanced for Mobile Broadband, Second Edition by Erik Dahlman – Stefan Parkvall – Johan Skold.

61. An Introduction to LTE: LTE, LTE-Advanced, SAE, VoLTE and 4G Mobile Communications by Christopher Cox.

62. The Secret Wireless War by Geoffrey Pidgeon.

63. High Frequency Techniques: An Introduction to RF and Microwave Engineering by Joseph F. White.

64. Behind The Front Panel: The Design & Development of 1920’s Radio by David Rutland.

65. Millimeter Wave Wireless Communications by Theodore S. Rappaport – Robert W. Heath Jr. – Robert C. Daniels – James N. Murdock.

66. Radio Production by Robert McLeish – Jeff Link.

67. The World of Ham Radio, 1901-1950: A Social History by Richard A. Barlett.

68. Random Matrix Methods for Wireless Communications by Romain Couillet – Mérouane Debbah.

69. Invisible Fields: Geographies of Radio Waves by .

70. “This Is Jerusalem Calling”: State Radio in Mandate Palestine by Andrea L. Stanton.

71. 22 Radio and Receiver Projects for the Evil Genius by Thomas Petruzzellis.

72. Antenna Toolkit, Second Edition by Joseph Carr – Joe Carr.

Telecommunications Engineering Books

1. Getting to Know ArcGIS for Desktop by Michael Law – Amy Collins.

2. Communicating in Groups: Applications and Skills by Katherine Adams – Gloria Galanes.

3. Computer Networking: A Top-Down Approach (6th Edition) by James F. Kurose – Keith W. Ross.

4. Getting to Know ArcGIS by Michael Law – Amy Collins.

5. Amusing Ourselves to Death: Public Discourse in the Age of Show Business by Neil Postman.

6. GIS Tutorial 1: Basic Workbook, 10.1 Edition by Wilpen L. Gorr – Kristen S. Kurland.

7. Signals and Systems (2nd Edition) by Alan V. Oppenheim – Alan S. Willsky – with S. Hamid.

8. Introduction to Networks Companion Guide by Cisco Networking Academy.

9. Network+ Guide to Networks by Jill West – Tamara Dean – Jean Andrews.

10. Network+ Guide to Networks (with Printed Access Card) by Tamara Dean.

11. Thunderstruck by Erik Larson.

12. Business Data Communications and Networking by Jerry FitzGerald – Alan Dennis – Alexandra Durcikova.

13. Fundamentals of Applied Electromagnetics (7th Edition) by Fawwaz T. Ulaby – Umberto Ravaioli.

14. Introduction to Remote Sensing, Fifth Edition by James B. Campbell – Randolph H. Wynne.

15. Principles of Electric Circuits: Conventional Current Version (9th Edition) by Thomas L. Floyd.

16. Linear Systems and Signals, 2nd Edition by B. P. Lathi.

17. Electronics Fundamentals: Circuits, Devices & Applications (8th Edition) by Thomas L. Floyd – David M. Buchla.

18. Mastering ArcGIS with Video Clips DVD-ROM by Maribeth Price.

19. Technical Communication Today (4th Edition) by Richard Johnson-Sheehan.

20. Modern Digital and Analog Communication Systems (The Oxford Series in Electrical and Computer Engineering) by B. P. Lathi – Zhi Ding.

21. Introduction to Networks v5.0 Lab Manual (Lab Companion) by Cisco Networking Academy.

22. Business Data Communications and Networking by Jerry FitzGerald.

23. Video Basics 7 by Herbert Zettl.

24. Geographic Information Systems and Science by Paul A. Longley – Mike Goodchild – David J. Maguire – David W. Rhind.

25. Introductory Geographic Information Systems (Prentice Hall Series in Geographic Information Science) by John R. Jensen – Ryan R. Jensen.

26. Broadcasting, Cable, the Internet, and Beyond: An Introduction to Modern Electronic Media by Joseph Dominick – Barry Sherman – Fritz Messere.

27. Media Now: Understanding Media, Culture, and Technology by Joseph Straubhaar – Robert LaRose – Lucinda Davenport.

28. Electronic Media: An Introduction by Lynne Schafer Gross.

29. Design for Electrical and Computer Engineers by Ralph Ford – Chris Coulston.

30. CompTIA Network+ N10-006 Cert Guide, Deluxe Edition by Keith Barker – Kevin Wallace – Michael D. Taylor.

31. Remote Sensing of the Environment: An Earth Resource Perspective (2nd Edition) by John R. Jensen.

32. Computer Networks, Fifth Edition: A Systems Approach (The Morgan Kaufmann Series in Networking) by Larry L. Peterson – Bruce S. Davie.

33. Programmable Logic Controllers (2nd Edition) by James A. Rehg – Glenn J. Sartori.

34. Signal Processing First by James H. McClellan – Ronald W. Schafer – Mark A. Yoder.

35. Biomedical Informatics: Computer Applications in Health Care and Biomedicine (Health Informatics) by .

36. Communication Technology Update and Fundamentals by .

37. The Architecture of Computer Hardware, Systems Software, and Networking: An Information Technology Approach by Irv Englander.

38. The Master Switch: The Rise and Fall of Information Empires by Tim Wu.

39. Computer Networks (5th Edition) by Andrew S. Tanenbaum – David J. Wetherall.

40. Introduction to Geographic Information Systems with Data Set CD-ROM by Kang-tsung Chang.

41. CompTIA Network+ Study Guide: Exam N10-006 (Comptia Network + Study Guide Authorized Courseware) by Todd Lammle.

42. Geographic Information Science and Systems by Paul A. Longley – Michael F. Goodchild – David J. Maguire – David W. Rhind.

43. Computer Networks and Internets (6th Edition) by Douglas E. Comer.

44. The Filter Bubble: How the New Personalized Web Is Changing What We Read and How We Think by Eli Pariser.

45. Data and Computer Communications (10th Edition) (William Stallings Books on Computer and Data Communications) by William Stallings.

46. Remote Sensing and Image Interpretation by Thomas Lillesand – Ralph W. Kiefer – Jonathan Chipman.

47. Getting to Know ArcGIS Desktop by Tim Ormsby – Eileen J. Napoleon – Robert Burke – Carolyn Groessl.

48. Principles and Applications of Electrical Engineering by Giorgio Rizzoni.

49. Principles of Electronic Materials and Devices by Safa Kasap.

50. Mike Meyers’ CompTIA Network+ Guide to Managing and Troubleshooting Networks, 3rd Edition (Exam N10-005) (CompTIA Authorized) by Mike Meyers.

51. Computer Networking: A Top-Down Approach (6th Edition) by James F. Kurose – Keith W. Ross.

52. Network Security: Private Communication in a Public World (2nd Edition) by Charlie Kaufman – Radia Perlman – Mike Speciner.

53. Discrete-Time Signal Processing (3rd Edition) (Prentice-Hall Signal Processing Series) by Alan V. Oppenheim – Ronald W. Schafer.

54. Guide to UNIX Using Linux (Networking (Course Technology)) by Michael Palmer.

55. Data Communications and Networking by Behrouz A. Forouzan.

56. Electrical Machines, Drives and Power Systems (6th Edition) by Theodore Wildi.

57. The Broadcast Century and Beyond: A Biography of American Broadcasting by Robert L Hilliard – Michael C Keith.

58. Networking Essentials (3rd Edition) by Jeffrey S. Beasley – Piyasat Nilkaew.

59. Networks, Crowds, and Markets: Reasoning About a Highly Connected World by David Easley – Jon Kleinberg.

60. Fundamentals of Telecommunications, 2nd Edition by Roger L. Freeman.

61. Digital Signal Processing (4th Edition) by John G. Proakis – Dimitris K Manolakis.

62. Microwave Engineering by David M. Pozar.

63. Field and Wave Electromagnetics (2nd Edition) by David K. Cheng.

64. Introduction to Engineering Ethics (Basic Engineering Series and Tools) by Mike Martin – Roland Schinzinger.

65. Robot Modeling and Control by Spong.

66. Digital Image Processing (3rd Edition) by Rafael C. Gonzalez – Richard E. Woods.

67. Business Data Communications- Infrastructure, Networking and Security (7th Edition) by William Stallings – Tom Case.

68. Networking All-in-One For Dummies by Doug Lowe.

69. The Esri Guide to GIS Analysis, Volume 2: Spatial Measurements and Statistics by Andy Mitchell.

70. GIS Tutorial 2: Spatial Analysis Workbook by David W. Allen.

71. Data Communications and Computer Networks: A Business User’s Approach by Curt White.

72. GIS Tutorial 1: Basic Workbook by Wilpen L. Gorr – Kristen S. Kurland.

73. CompTIA Network+ Certification All-in-One Exam Guide, 5th Edition (Exam N10-005) by Mike Meyers.

74. Ham Radio For Dummies by H. Ward Silver.

75. The ESRI Guide to GIS Analysis Volume 1: Geographic Patterns & Relationships by Andy Mitchell.

76. CompTIA Network+ N10-006 Exam Cram (5th Edition) by Emmett Dulaney.

77. Networking All-in-One For Dummies by Doug Lowe.

78. Guide to Parallel Operating Systems with Windows 7 and Linux (Networking) by Ron Carswell – Shen Jiang – Terrill Freese.

79. The Business of Media Distribution: Monetizing Film, TV, and Video Content in an Online World (American Film Market Presents) by Jeffrey C. Ulin.

80. Mike Meyers’ CompTIA Network+ Guide to Managing and Troubleshooting Networks, Fourth Edition (Exam N10-006) (Mike Meyers’ Computer Skills) by Mike Meyers.

81. Modern Electronic Communication (9th Edition) by Jeffrey S. Beasley – Gary M. Miller.

82. Fundamentals of Electrical Engineering by Giorgio Rizzoni.

83. Data Communications and Computer Networks: A Business User’s Approach by Curt White.

84. Microsoft Windows Networking Essentials by Darril Gibson.

85. Sound Reporting: The NPR Guide to Audio Journalism and Production by Jonathan Kern.

86. Here Comes Everybody: The Power of Organizing Without Organizations by Clay Shirky.

87. Remote Sensing and Image Interpretation by Thomas Lillesand – Ralph W. Kiefer – Jonathan Chipman.

88. The Art of Electronics by Paul Horowitz – Winfield Hill.

89. Ethics in Engineering by Mike W. Martin – Roland Schinzinger.

90. Losing the Signal: The Untold Story Behind the Extraordinary Rise and Spectacular Fall of BlackBerry by Jacquie McNish – Sean Silcoff.

91. Help Me! Guide to iPhone 6: Step-by-Step User Guide for the iPhone 6 and iPhone 6 Plus by Charles Hughes.

92. Computer Networking: A Top-Down Approach (5th Edition) by James F. Kurose – Keith W. Ross.

93. Amusing Ourselves to Death: Public Discourse in the Age of Show Business by Neil Postman.

94. Fundamentals of Applied Electromagnetics by Eric Michielssen,Umberto Ravaioli Fawwaz T. Ulaby.

95. Signals and Systems: Continuous and Discrete (4th Edition) by Rodger E. Ziemer – William H Tranter – D. R. Fannin.

Drilling Engineering Books

1. Applied Drilling Engineering (Spe Textbook Series, Vol 2) by Jr. Adam T. Bourgoyne – Keith K. Millheim – Martin E. Chenevert – Jr. F. S. Young.

2. The Boom: How Fracking Ignited the American Energy Revolution and Changed the World by Russell Gold.

3. Nontechnical Guide to Petroleum Geology, Exploration, Drilling & Production, 3rd Ed. by Norman J. Hyne.

4. The Boom: How Fracking Ignited the American Energy Revolution and Changed the World by Russell Gold.

5. The Simple Truth: BP’s Macondo Blowout by J. A. Turley.

6. The Oil & Gas Industry: A Nontechnical Guide by Joseph Hilyard.

7. Standard Handbook of Engineering Calculations, Fifth Edition by Tyler Hicks.

8. Drilling Technology in Nontechnical Language, 2d Ed. by Steve Devereux.

9. Standard Aircraft Handbook for Mechanics and Technicians, Seventh Edition by Larry Reithmaier – Ron Sterkenburg.

10. Deepwater Petroleum Exploration & Production: A Nontechnical Guide, 2nd Edition by William L. Leffler – Richard Pattarozzi – Gordon Sterling.

11. Practical Formation Evaluation by Robert C. Ransom.

12. Precision Machining Technology by Peter J. Hoffman – Eric S. Hopewell – Brian Janes – Kent M. Sharp Jr..

13. Formulas and Calculations for Drilling, Production, and Workover, Third Edition: All the Formulas You Need to Solve Drilling and Production Problems by William C. Lyons Ph.D. P.E. – Thomas Carter – Norton J. Lapeyrouse.

14. Moving The Earth: The Workbook of Excavation Sixth Edition by Herbert Nichols – David Day.

15. Drilling Engineering by J.J. Azar – G. Robello Samuel.

16. Petroleum Rock Mechanics: Drilling Operations and Well Design by Bernt Aadnoy – Reza Looyeh.

17. Fundamentals of Drilling Engineering (Spe Textbook Series) by .

18. The Professional Diver’s Handbook by .

19. Downhole Drilling Tools by G. Robello Samuel.

20. Nontechnical Guide to Petroleum Geology, Exploration, Drilling and Production (2nd Edition) by Norman J. Hyne – Norman J. Ph.d Hyne.

21. Fundamentals of Marine Riser Mechanics: Basic Principles and Simplified Analysis by Charles Sparks.

22. Dictionary of Petroleum Exploration, Drilling & Production by Norman J. Hyne – Hyne.

23. Dynamic Positioning Systems by Hubert Fay.

24. Horizontal Wells: Formation Evaluation, Drilling, and Production, Including Heavy Oil Recovery (v. 9) by Roberto Aguilera – G. M. Cordell – G. W. Nicholl – J. S. Artindale – M. C. Ng.

25. A Generalized Approach To Primary Hydrocarbon Recovery Of Petroleum Exploration & Production, Volume 4 (Handbook of Petroleum Exploration and Production) by .

26. Hydrofracking: What Everyone Needs to Know® by Alex Prud’homme.

27. Reservoir Stimulation , 3rd Edition by .

28. A Hole at the Bottom of the Sea: The Race to Kill the BP Oil Gusher by Joel Achenbach.

29. A Primer of Oilwell Drilling, 7th Ed. by Dr. Paul M. Bommer.

30. A Sea in Flames: The Deepwater Horizon Oil Blowout by Carl Safina.

31. Dictionary of Petroleum Exploration, Drilling & Production by Norman J. Hyne.

32. WELL COMPLETION AND SERVICING (Oil and Gas Field Development Techniques) by Denis Perrin.

33. Handbook of Offshore Oil and Gas Operations by James G. Speight.

34. Sea Loads on Ships and Offshore Structures (Cambridge Ocean Technology Series) by O. Faltinsen.

35. Petroleum Refining Processes (Chemical Industries) by .

36. Fracking: A Reference Handbook (Contemporary World Issues) by David E. Newton Ph.D..

37. The Tarball Chronicles: A Journey Beyond the Oiled Pelican and Into the Heart of the Gulf Oil Spill by David Gessner.

38. Fire on the Horizon LP: The Untold Story of the Gulf Oil Disaster by Tom Shroder – John Konrad.

39. Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids by Johannes Fink.

40. TRENCHLESS TECHNOLOGY PIPING: INSTALLATION AND INSPECTION by Mohammad Najafi.

41. The Drilling Manual, Fifth Edition by .

42. A Primer of Offshore Operations by Ron Baker.

43. Practical Well Planning and Drilling Manual by Steve Devereux.

44. Drilling Down: The Gulf Oil Debacle and Our Energy Dilemma by Joseph A. Tainter – Tadeusz W. Patzek.

45. Analysis and Control of Oilwell Drilling Vibrations: A Time-Delay Systems Approach (Advances in Industrial Control) by Martha Belem Saldivar Marquez – Islam Boussaada – Hugues Mounier – Silviu-Iulian Niculescu.

46. Horizontal Directional Drilling (HDD): Utility and Pipeline Applications (Civil Engineering) by David Willoughby.

47. Geotechnical Engineering Design by Ming Xiao.

48. Master Locksmithing: An Expert’s Guide to Master Keying, Intruder Alarms, Access Control Systems, High-Security Locks… by Bill Phillips.

49. Drilling Data Handbook 9th Edition by Jean-Paul Nguyen – Gilles Gabolde.

50. Directional Drilling (Petroleum Engineering and Development Studies) (v. 2) by Tom Inglis.

51. Well Logging for Earth Scientists by Darwin V. Ellis – Julian M. Singer.

52. Subsea Engineering Handbook by .

53. Engineering Rock Mass Classification: Tunnelling, Foundations and Landslides by R K Goel – Bhawani Singh.

54. Practical Well Control by Ron Baker.

55. Managed Pressure Drilling (Gulf Drilling) by Bill Rehm – Arash Hagshenas – Amir Paknejad – W. James Hughes.

56. Making Hole (Rotary Drilling Series, Unit 2, Lesson 1) by William E. Jackson – Petroleum Extension Service (Petex).

57. Blowout and Well Control Handbook by Robert D. Grace.

58. Commercial Oil-Field Diving. by Nicholas B. Zinkowski.

59. Cased Hole and Production Log Evaluation by James J. Smolen.

60. Managed Pressure Drilling: Modeling, Strategy and Planning by Wilson C. Chin PhD.

61. Sunken Treasure (Reading Rainbow Books) by Gail Gibbons.

62. Deep Water: The Gulf Oil Disaster and the Future of Offshore Drilling: Report to the President, January 2011 by .

63. Disaster on the Horizon: High Stakes, High Risks, and the Story Behind the Deepwater Well Blowout by Bob Cavnar.

64. Surfactants: Fundamentals and Applications in the Petroleum Industry by .

65. Black Tide: The Devastating Impact of the Gulf Oil Spill by Antonia Juhasz.

66. The Real Cost of Fracking: How America’s Shale Gas Boom Is Threatening Our Families, Pets, and Food by Michelle Bamberger – Robert Oswald.

67. Cost Estimating Manual for Pipelines and Marine Structures (Estimator’s Man-Hour Library) by John S. Page.

68. Gas Well Deliquification, Second Edition (Gulf Drilling Guides) by James F. Lea – Henry V. Nickens – Mike Wells BSc(Hons) MD FRCPath
MBBCh MScMed(Emergency Medicine) DipPEC(SA) FCEM(SA).

69. Geological Well Logs: Their Use in Reservoir Modeling by S. Luthi.

70. The Boom: How Fracking Ignited the American Energy Revolution and Changed the World by Russell Gold.

71. A Primer of Oilwell Service, Workover, and Completion by Kate Van Dyke.

72. Wave Forces on Offshore Structures by Turgut ‘Sarp’ Sarpkaya.

73. 200,000,000 Years Beneath the Sea: The Story of the Glomar Challenger, the Ship That Unlocked the Secrets of the Oceans and Their Continents by Peter Briggs.

74. A Primer of Oilwell Drilling: A Basic Text of Oil and Gas Drilling by Ron Baker.

75. Practical Handbook of Grouting: Soil, Rock, and Structures by James Warner.

76. Making Rifle Barrels by .

77. Dynamics of Offshore Structures by .

78. The Book of Michael of Rhodes: A Fifteenth-Century Maritime Manuscript, Vol. 3: Studies by Michael of Rhodes.

79. Subsea Pipeline Integrity and Risk Management by Yong Bai – Qiang Bai.

Roofing Engineering Books

1. Green Roof Plants: A Resource and Planting Guide by Edmund C. Snodgrass – Lucie L. Snodgrass.

2. Roofing Construction & Estimating by Daniel Atcheson.

3. Black & Decker The Complete Guide to Roofing & Siding: Updated 3rd Edition – Choose, Install & Maintain Roofing & Siding Materials (Black & Decker Complete Guide) by Editors of Creative Publishing.

4. Roof Framing by Marshall Gross.

5. The Slate Roof Bible: Understanding, Installing and Restoring the World’s Finest Roof (The Slate Roof Bible, 2nd Edition) by Joseph Jenkins.

6. Manual of Low-Slope Roof Systems: Fourth Edition by C.W. Griffin – Richard Fricklas.

7. Framing Roofs by Editors of Fine Homebuilding.

8. Roofing Design and Practice by Stephen Patterson – Medan Mehta.

9. The Complicated Roof – a cut and stack workbook: Companion Guide to “A Roof Cutters Secrets” by Will Holladay.

10. Roofing, Flashing, and Waterproofing (For Pros By Pros) by Editors of Fine Woodworking.

11. Shingle Styles. Innovation and tradition in American architecture, 1874 to 1982 by Bret Morgan – Leland M Roth.

12. Ortho’s All About Roofing & Siding Basics (Ortho’s All about) by Ortho Books.

13. How to Plan, Contract, and Build Your Own Home, Fifth Edition: Green Edition (How to Plan, Contract & Build Your Own Home) by Richard Scutella – Dave Heberle.

14. Patio Roofs and Gazebos by Donald W. Vandervort – Frances L. Feldman.

15. The Professional Design Guide to Green Roofs by Lisa Lee Benjamin – Karla Dakin – Mindy Pantiel.

16. Thatches and Thatching: A Handbook for Owners, Thatchers and Conservators by Marjorie Sanders – Roger Angold.

17. Residential Structures and Framing: Practical Engineering and Advanced Framing Techniques… by Robert Randall.

18. Roofing: Materials & Installation by William P. Spence.

19. Framing Roofs (For Pros By Pros) by Editors of Fine Homebuilding.

20. The Complete Guide to Home Roofing Installation and Maintenance: How to Do It Yourself and Avoid the 60 Ways Your Roofer Can Nail You by John W., Jr. Chiles.

21. Complete Siding Handbook: Installation, Maintenance, Repair by James E. Brumbaugh – John Leeke.

22. Flat Roof Construction Manual (Konstruktionsatlanten) by Klaus Sedlbauer.

23. Roofing The Right Way by Steven Bolt.

24. To Build New York: 100 Years of Infrastructure by The General Contractors Association of New York – David Kusnet.

25. Elevated Work Platforms and Scaffolding : Job Site Safety Manual by Matthew Burkart – Michael McCann – Daniel Paine – Jim Lapping – Michael Joye.

26. Roof Tiling and Slating: A Practical Guide by Kevin Taylor.

27. Roof Construction Manual, English Edition by Eberhard Schunck – Hans Jochen Oster – Rainer Barthel – Kurt Kießl – Hans Jochen Oster – Kurt Kiebl.

28. Roof Cutters Secrets: To Framing the Custom Home by Will L. Holladay.

29. Roofing & Siding by Sunset Books.

30. Principles of Home Inspection: Roofing by Carson Dunlop.

31. Metal Roofing: Book 1 (Metal roofing instruction manuals) (Volume 1) by Mr. Burt Fuller.

32. Roofing (Best of Fine Homebuilding) by Taunton Press.

33. Roofing Failures by Carl G. Cash.

34. The Slate Roof Bible: Everything You Need to Know About the World’s Finest Roof, 3rd Edition by Joseph C. Jenkins.

35. Miller’s Guide to Framing and Roofing (Home Reference) by Mark Miller – Rex Miller.

36. Framing Roofs (Builder’s Library) by Editors of Fine Homebuilding.

37. Thatching by Nicholas Hall.

38. Roofers Handbook by William Edgar Johnson.

39. Complete Roofing Handbook: Installation, Maintenance, Repair by James E. Brumbaugh.

40. The Tensioned Fabric Roof by Craig G. Huntington.

41. The Slate Roof Bible by Joseph Jenkins.

42. Roofing and Siding: How to Install, Repairs & Maintenance, Buyer’s Guide (Southern Living (Paperback Sunset)) by .

43. A Roof Cutter’s Secrets to Framing the Custom Home (2nd Ed) by Will L. Holladay.

44. Thatch and Thatching (Shire Album Series : No. 16) by Jacqueline Fearn.

45. Structure, Roofing, and the Exterior by Alan Carson – Robert Dunlop.

46. Do-It-Yourself Roofing & Siding: Maintaince & Repair Insulation (Sunset Building, Remodeling & Home Design Books) by .

47. Quick Guide: Roofing: Step-by-Step Installation Techniques by Editors of Creative Homeowner.

48. Sunset Patio Roofs & Gazebos by .

49. Construction Calculations Manual by Sidney M Levy.

50. Felt and Torch on Roofing: A Practical Guide by Tim Richardson.

51. Roofing the Right Way by Steven Bolt.

52. Roofing Contractor: Start and Run a Money-Making Business by R. Dodge Woodson.

53. Thatching and Thatched Buildings by Michael Billett.

54. MS-26 The Asphalt Binder Handbook by R. Michael Anderson.

55. Roofing & Insulation by Mike Lawrence.

56. Construction Calculations Manual by Sidney M Levy.

57. All About Roofs and Sidings (Ortho library) by Ron Hildebrand.

58. Roofing and Siding (Fix-It-Yourself Series) by Time-Life Books.

59. Roof Construction and Loft Conversion by C. N. Mindham.

60. Modern Construction: Roofs (Modern Construction Series) by Andrew Watts.

61. Manual of Low-Slope Roof Systems by C. W. Griffin – R. L. Fricklas – Richard Fricklas.

62. Cloud 9: Rooftop Architecture by .

63. Shade Design for Avoiding Solar & UV by Toshimasa Kawanishi.

64. Historic Slate Roofs: With How-To Info and Specifications by .

65. Steel Square – Use Of The Scales, Roof Framing, Illustrative Problems And Other Uses by Gilbert Townsend.

66. Roofs and Siding (Home Repair and Improvement) by Time-Life Books.

67. Goss’s Roofing Ready Reckoner: Metric Cutting and Sizing Tables for Timber Roof Members by Chris N. Mindham.

68. Essentials of Home Inspection: Roofing by Carson Dunlop & Associates.

69. Builder’s Instant Answers by Sidney M. Levy R. Dodge Woodson.

70. Roofing: Design Criteria, Options, Selection by R. D. Herbert.

71. Roofing the right way: A step-by-step guide for the homeowner by Steven Bolt.

72. Roofing Instant Answers (Instant Answer Series) by Terry Kennedy.

73. Roofing Failures by Carl G. Cash.

74. Roofing (Fundamental Series) (Passbooks) (Fundamental Passbooks) by Jack Rudman.

75. Problems in Roofing Design by Author Unknown.

76. Roof Builder’s Handbook by William C. McElroy.

77. Thatch and Thatching (Shire Library) by Jacqueline Fearn.

78. Roof Construction and Loft Conversion by C. N. Mindham.

79. American Roofing, Roofing in America by Mark Kelly.

80. Profiled Sheet Roofing and Cladding: A Guide to Good Practice by .

81. Builder’s Instant Answers by Sidney M. Levy – R. Dodge Woodson.

82. Quality Improvement Techniques in Construction: Principles and Methods (Chartered Institute of Building) by Steven Mccabe.

83. The Complete Guide to Living with Thatch by Michael Billett.

84. Patio Roofs and Gazebos (Southern Living (Paperback Sunset)) by Southern Living – Donald W. Vandervort.

85. Concrete Folded Plate Roofs by C. Wilby.

86. The NIR Difference: National International Roofing by Timothy K. Lynn.

87. Spon’s Estimating Cost Guide to Roofing (Spon’s Estimating Costs Guides) by Bryan Spain.

88. Expodach: Roof Structure at the World Exhibition, Hanover 2000 (English and German Edition) by .

Metallurgy Engineering Books

1. Rust: The Longest War by Jonathan Waldman.

2. Phase Transformations in Metals and Alloys, Third Edition (Revised Reprint) by David A. Porter – Kenneth E. Easterling – Mohamed Sherif.

3. Machining Fundamentals by John R. Walker – Bob Dixon.

4. Metal Fatigue in Engineering by Ali Fatemi.

5. Advanced Strength and Applied Stress Analysis by Richard Budynas.

6. Welding For Dummies by Steven Robert Farnsworth.

7. Metallurgy Fundamentals by Daniel A. Brandt – J. C. Warner.

8. Wills’ Mineral Processing Technology, Seventh Edition: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery by Barry A. Wills.

9. The Organometallic Chemistry of the Transition Metals by Robert H. Crabtree.

10. Barren Lands: An Epic Search for Diamonds in the North American Arctic by Kevin Krajick.

11. Modern Metalworking by John R. Walker.

12. How To Weld (Motorbooks Workshop) by Todd Bridigum.

13. Technical Shop Mathematics by Achatz – Thomas.

14. Practical Metallurgy and Materials of Industry (6th Edition) by John E. Neely – Thomas J. Bertone.

15. Welding Fabrication and Repair by Frank Marlow.

16. Welding Essentials by William L. Galvery Jr. – Frank B. Marlow.

17. Welding and Metal Fabrication by Larry Jeffus.

18. Aluminum: Technology, Applications and Environment: A Profile of a Modern Metal Aluminum from Within by .

19. Modern Physical Metallurgy, Eighth Edition by R. E. Smallman PhD – A.H.W. Ngan PhD.

20. Machining Fundamentals by John R. Walker.

21. Welding Level 1 Trainee Guide, Hardcover (4th Edition) by NCCER.

22. Audel Welding Pocket Reference by James E. Brumbaugh – Rex Miller.

23. Hardening, Tempering and Heat Treatment (Workshop Practice) by George Gently.

24. The Charcoal Foundry (Build Your Own Metal Working Shop from Scrap, Vol. 1) by David J. Gingery.

25. Metalworking: Doing It Better by Tom Lipton.

26. Handbook of Nondestructive Evaluation, Second Edition by Chuck Hellier.

27. The Complete Book of Locks and Locksmithing (Complete Book of Locks & Locksmithing) by Bill Phillips.

28. Welding: Principles and Applications by Larry Jeffus.

29. Pipe Welding Procedures by Hoobasarl Rampaul.

30. Modern Welding by Andrew D. Althouse – Carl H. Turnquist – William A. Bowditch – Kevin E. Bowditch – Mark A. Bowditch.

31. Mechanical Metallurgy by George Dieter.

32. Gas Metal Arc Welding Handbook by William H. Minnick.

33. Corrosion Engineering: Principles and Practice by Pierre Roberge.

34. How to Run a Lathe: The Care and Operation of a Screw Cutting Lathe by John Joseph O’Brien – Miles William O’Brien – South Bend Lathe Works.

35. Rare: The High-Stakes Race to Satisfy Our Need for the Scarcest Metals on Earth by Keith Veronese.

36. Mineral Processing Technology, Sixth Edition by Barry A. Wills.

37. Metal Fatigue in Engineering by H. O. Fuchs – R. I. Stephens.

38. Pipefitters Handbook by Forrest Lindsey.

39. Structure and Properties of Engineering Alloys by William F. Smith.

40. Professional Sheet Metal Fabrication (Motorbooks Workshop) by Ed Barr.

41. Failure Analysis of Engineering Materials by Charles Brooks – Ashok Choudhury – Charlie R. Brooks.

42. Hydrometallurgy: Fundamentals and Applications by Michael L. Free.

43. Welding: Principles and Applications, Fifth Edition by Larry Jeffus.

44. Welder’s Handbook: A Complete Guide to MIG, TIG, Arc & Oxyacetylene Welding by Richard Finch.

45. Metal Forming: Mechanics and Metallurgy by William F. Hosford – Robert M. Caddell.

46. Metalworking Sink or Swim: Tips and Tricks for Machinists, Welders and Fabricators by Tom Lipton.

47. Print Reading for Welding and Fabrication by Kevin Corgan.

48. How to Cast Small Metal and Rubber Parts (2nd Edition) by William Cannon.

49. Principles of Metal Manufacturing Processes by J. Beddoes – M. Bibby.

50. Welding by Don Geary – Rex Miller.

51. Welding Licensing Exam Study Guide (McGraw-Hill’s Welding Licensing Exam Study Guide) by Rex Miller – Mark Miller.

52. Farm and Workshop Welding: Everything You Need to Know to Weld, Cut, and Shape Metal by Andrew Pearce.

53. Steels: Processing, Structure, And Performance by George Krauss.

54. Modern Metalworking by John R. Walker.

55. Magnetism and Transition Metal Complexes (Dover Books on Chemistry) by F. E. Mabbs – D. J. Machin.

56. Modern Metalworking by John R. Walker.

57. Recovery and Refining of Precious Metals by C.W. Ammen.

58. Steel: From Mine to Mill, the Metal that Made America by Brooke C. Stoddard.

59. The Technology of Metallurgy by William K. Dalton.

60. Metals And How To Weld Them by Theodore Brewster Jefferson – Gorham Woods.

61. Blast Furnace Phenomena and Modelling by The Iron and Steel Institute of Japan.

62. Rare Earths: Science, Technology, Production and Use by Jacques Lucas – Pierre Lucas – Thierry Le Mercier – Alain Rollat – William G. Davenport.

63. Lab Manual for Jeffus/Bower’s Welding Skills, Processes and Practices for Entry-Level Welders, Book 1 by Larry Jeffus – Lawrence Bower.

64. Workbook For Use With Welding: Principles and Practices by Joseph Ciaramitaro.

65. Castings, Second Edition by John Campbell.

66. Machinery’s Handbook by Franklin D Jones – Henry H Ryffel – Erik Oberg – Christopher J McCauley – Ricardo M Heald.

67. Machinery’s Handbook : A Reference Book for the Mechanical Engineer, Designer, Manufacturing Engineer, Draftsman, Toolmaker, and Machinist by Franklin D. Jones – Holbrook L. Horton – Henry H. Ryffel.

68. Corrosion and Surface Chemistry of Metals (Engineering Sciences : Materials) by Dieter Landolt.

69. New Edge of the Anvil: A Resource Book for the Blacksmith by Jack Andrews.

70. Heat Treatment, Selection, and Application of Tool Steels 2E by William E. Bryson.

71. The TAB Guide to DIY Welding: Hands-on Projects for Hobbyists, Handymen, and Artists by Jackson Morley.

72. Principles of the Austenitization of Steels by .

73. Foundrywork for the Amateur (Workshop Practice Series) by B. Terry Aspin.

74. Physical Metallurgy Principles (Prindle, Weber & Schmidt Series in Advanced Mathematics) by Reza Abbaschian – Robert E. Reed-Hill.

75. Heat Treatment, Structure and Properties of Nonferrous Alloys by C. R. Brooks – Charlie R. Brooks.

76. SME Mining Enginering Handbook, Third Edition by .

77. Metallurgy Fundamentals by Daniel A. Brandt – J.C. Warner – J. C. Warner.

78. Metals Handbook: Metallography and Microstructures by John Newby – Kathleen Mills – American Society for Metals.

79. Manual de soldadura con arco electrico / Manual of Electric Arc Welding: Una Guia Paso a Paso / a Step by Step Guide (Como Hacer Bien Y Facilmente / How to Do It Right and Easy) (Spanish Edition) by Luis Lesur.

80. Modern Welding Technology by Howard B. Cary.

81. Metal: Forming, Forging, and Soldering Techniques by Jose Antonio Ares.

82. Welding Basics by Karen Ruth – The editors of Creative Publishing international.

83. Metallurgy by B. J. Moniz.

84. Modern Welding Technology (6th Edition) by Howard B. Cary – Scott Helzer.

85. Handbook of Corrosion Engineering 2/E by Pierre Roberge.

86. Metal: Design and Fabrication by David Frisch – Susan Frisch.

87. Metallurgical Failures in Fossil Fired Boilers by David French.

88. Soldadura / Welding: Principios y aplicaciones / Principles and applications (Spanish Edition) by Larry Jeffus.

89. Welding Technology Fundamentals Laboratory Manual by William A. Bowditch – Kevin E. Bowditch – Mark A. Bowditch.

90. Modern Metalworking Workbook by John R. Walker.

91. Welding Print Reading by John R. Walker – W. Richard Polanin.

92. Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design by Yusuf Altintas.

93. Machining Fundamentals, Workbook by John R. Walker.

Drafting & Mechanical Drawing Books

1. Building Construction Illustrated by Francis D. K. Ching.

2. Technical Drawing with Engineering Graphics (14th Edition) by Frederick E. Giesecke – Ivan L. Hill – Henry C. Spencer – Alva E. Mitchell – John Thomas Dygdon – James E. Novak – Shawna E. Lockhart – Marla Goodman.

3. Fundamentals of Graphics Communication by Gary Bertoline – Eric Wiebe – Nathan Hartman – William Ross.

4. Engineering Design Graphics: Sketching, Modeling, and Visualization by James Leake.

5. Fundamentals of Machine Component Design by Robert C. Juvinall – Kurt M. Marshek.

6. Engineering Design: A Project-Based Introduction by Clive L. Dym – Patrick Little – Elizabeth Orwin.

7. Print Reading for Industry by Walter C. Brown – Ryan K. Brown.

8. Blueprint Reading for Machine Trades (7th Edition) by Russ Schultz – Larry Smith.

9. Blueprint Reading for Welders by A.E. Bennett – Louis J Siy.

10. AutoCAD and Its Applications Basics 2015 by Terence M. Shumaker – David A. Madsen – David P. Madsen.

11. Print Reading for Industry by Walter C. Brown – Ryan K. Brown.

12. Drafting for the Theatre by Dennis Dorn – Mark Shanda.

13. Engineering Drawing Problems Workbook (Series 4) for Technical Drawing with Engineering Graphics by Karen R. Juneau – Paige R. Davis.

14. Engineering Drawing and Design by David A. Madsen – David P. Madsen.

15. Geometric Dimensioning and Tolerancing by David A. Madsen – David P. Madsen.

16. Engineering Design: A Project Based Introduction by Clive L. Dym – Patrick Little.

17. Architectural Drafting and Design (Available Titles CourseMate) by Alan Jefferis – David A. Madsen – David P. Madsen.

18. Mechanical Design of Machine Elements and Machines: A Failure Prevention Perspective by Jack A. Collins – Henry R. Busby – George H. Staab.

19. Fundamentals of Engineering Design (2nd Edition) by Barry Hyman.

20. Rapid Viz: A New Method for the Rapid Visualitzation of Ideas by Kurt Hanks – Larry Belliston.

21. Engineering Drawing, Problem Series 1 by Frederick E. Giesecke – Mitchell Alva – Henry C. Spencer – Ivan L. Hill.

22. Interpreting Engineering Drawings by Ted Branoff – Cecil H. Jensen – Jay D. Helsel.

23. AutoCAD and Its Applications Basics 2016 by Terence M. Shumaker – David A. Madsen – David P. Madsen.

24. AutoCAD and Its Applications Comprehensive 2015 by Terence M. Shumaker – David A. Madsen – David P. Madsen – Jeffrey A. Laurich – J. C. Malitzke – Craig P. Black.

25. 100 Diagrams That Changed the World: From the Earliest Cave Paintings to the Innovation of the iPod by Scott Christianson.

26. Engineering Graphics (8th Edition) by Frederick E. Giesecke – Alva E. Mitchell – Henry C. Spencer – Ivan L. Hill – John Thomas Dygdon – James E. Novak – Robert Olin Loving.

27. Basic Blueprint Reading and Sketching by Thomas P. Olivo – C. Thomas Olivo.

28. Beginning AutoCAD 2015 by Cheryl Shrock – Steve Heather.

29. Engineering Design Graphics with AutoCAD 2007 (12th Edition) by James H. Earle.

30. Technical Drawing (13th Edition) by Frederick E. Giesecke – Alva E. Mitchell – Henry C. Spencer – Ivan L. Hill – John Thomas Dygdon – James E. Novak – Shawna E. Lockhart.

31. Fundamentals of Geometric Dimensioning and Tolerancing by Alex Krulikowski.

32. Print and Specifications Reading for Construction by Ron Russell.

33. Basic Technical Drawing, Student Edition by Glencoe McGraw-Hill – McGraw-Hill.

34. Pipe Drafting and Design, Third Edition by Roy A. Parisher – Robert A. Rhea.

35. Blueprint Reading for Electricians by Rob Zachariason.

36. Kinematics, Dynamics, and Design of Machinery by K. J. Waldron – G. L. Kinzel.

37. AutoCAD Tutor for Engineering Graphics: 2013 and Beyond (with CAD Connect Web Site Printed Access Card) (Autodesk 2013 Now Available!) by Kevin Lang.

38. Applied Descriptive Geometry by Kathryn Ann Holliday-Darr.

39. Architectural Drafting and Design by Alan Jefferis – David A. Madsen.

40. Civil Drafting Technology (7th Edition) by David A. Madsen Emeritus – Terence M. Shumaker – David P. Madsen.

41. Jig and Fixture Design, 5E (Delmar Learning Drafting) by Edward Hoffman.

42. Biomechanics and Motor Control of Human Movement by David A. Winter.

43. Drafting & Design by Clois E. Kicklighter Ed. D. – Walter C. Brown.

44. Introduction to Robotics: Analysis, Control, Applications by Saeed B. Niku.

45. Construction Graphics: A Practical Guide to Interpreting Working Drawings by Keith A. Bisharat.

46. LogicWorks 5 Interactive Software by x Capilano Computing.

47. Interpreting Engineering Drawings (Drafting and Design) by Cecil H. Jensen – Jay D. Helsel.

48. Inside Rhinoceros 5 by Ron K.C. Cheng.

49. Architecture: Residential Drafting and Design Workbook by Clois E. Kicklighter Ed. D. – W. Scott Thomas.

50. Harnessing AutoCAD: 2013 and Beyond (with CAD Connect Web Site Printed Access Card) (Autodesk 2013 Now Available!) by G.V. Krishnan – Thomas A Stellman.

51. Engineering Design: An Introduction (Texas Science) by John R. Karsnitz – John P. Hutchinson – Stephen O’Brien.

52. Customizing AutoCAD 2013 by Prof. Sham Tickoo – Cadcim Technologies.

53. Print Reading for Engineering and Manufacturing Technology with Premium Web Site Printed Access Card by David A. Madsen.

54. AutoCAD LT 2014 for Designers by Prof. Sham Tickoo Purdue Univ..

55. Process Pipe Drafting by Terence M. Shumaker.

56. Introduction to Solid Modeling Using SolidWorks 2014 by William Howard – Joseph Musto.

57. AutoCAD and Its Applications Basics 2014 by Terence M. Shumaker – David A. Madsen – David P. Madsen.

58. Blueprint Reading for Welders (Blueprint Reading Series) by A.E. Bennett – Louis J Siy.

59. Blueprint Reading Basics by Warren Hammer.

60. Drafting & Design by Clois E. Kicklighter Ed. D. – Walter C. Brown.

61. GD&T: Application and Interpretation by Bruce A. Wilson.

62. Electronics Drafting by John Frostad.

63. Engineering Design: A Systematic Approach by Gerhard Pahl – W. Beitz – J. Feldhusen – K. H. Grote.

64. Mechanical Drawing Board & CAD Techniques, Student Edition (FRENCH: MECHANICAL DRAWING) by McGraw-Hill Education.

65. Tools and Tactics of Design by Peter G. Dominick – John T. Demel – William M. Lawbaugh – Richard J. Freuler – G. L. Kinzel – Eli Fromm.

66. Commercial Drafting and Detailing by Alan Jefferis – Kenneth D. Smith.

67. Technical Drawing and Engineering Communication (Applied English) by David E. Goetsch – William S. Chalk – Raymond L. Rickman – John A. Nelson.

68. Principles of Technical Drawing by Frederick E. Giesecke.

69. AutoCAD: A Problem-Solving Approach: 2013 and Beyond (Autodesk 2013 Now Available!) by Sham Tickoo.

70. Study Guide for Certification of Geometric Dimensioning and Tolerancing Professionals (GDTP) by Robert H. Nickolaisen.

71. Architectural Drafting for Interior Designers by Lydia Cline.

72. Blueprint Reading for Welders (Delmar Learning Blueprint Reading) by A.E. Bennett – Louis J Siy.

73. Up and Running with AutoCAD 2015: 2D and 3D Drawing and Modeling by Elliot Gindis.

74. Machine Trades Print Reading by Michael A. Barsamian – Richard A. Gizelbach.

75. Applying AutoCAD® 2013 by Terry Wohlers.

76. AutoCAD and Its Applications Comprehensive 2016 by Terence M. Shumaker – David A. Madsen – David P. Madsen – Jeffrey A. Laurich – Craig P. Black – J. C. Malitzke.

77. Drafting for Electronics (3rd Edition) by G. Louis Lamit – J. Sandra Lloyd.

78. Geometric Dimensioning and Tolerancing for Mechanical Design 2/E by Gene Cogorno.

79. Construction Drawings and Details for Interiors: Basic Skills by W. Otie Kilmer – Rosemary Kilmer.

80. Introduction to 3D Spatial Visualization: An Active Approach (Book & CD) by Sheryl A. Sorby – Anne Francis Wysocki – Beverly J. Baartmans.

81. AutoCAD and Its Applications Comprehensive 2014 by Terence M. Shumaker – David A. Madsen – David P. Madsen – Jeffrey A. Laurich – J. C. Malitzke – Craig P. Black.

82. Designer Drafting for the Entertainment World by Patricia Woodbridge.

83. Measurement Systems : Application and Design by Ernest Doebelin.

84. The Fundamentals of Visualization, Modeling, and Graphics for Engineering Design by Dennis K. Lieu – Sheryl A. Sorby.

85. Engineering Drawing and Design by David A. Madsen.

86. Blueprint Reading for Construction (2nd Edition) by James A. S. Fatzinger.

87. Structural Drafting by David E. Goetsch.

88. Fundamentals of Graphics Communication by Gary Bertoline – Eric Wiebe – Nathan Hartman – William Ross.

89. Structural Steel Drafting and Design by David C. MacLaughlin – Hector Estrada.

90. Engineering Design Graphics: Sketching, Modeling, and Visualization by James Leake.

91. Drafting and Design for Architecture & Construction by Dana J. Hepler – Paul Ross Wallach – Donald Hepler.

92. Structural, Civil and Pipe Drafting by David L. Goetsch.

93. Internal Combustion Engines: Applied Thermosciences by Colin R. Ferguson – Allan T. Kirkpatrick.

94. AutoCAD and Its Applications Comprehensive 2013 by Terence M. Shumaker – David A. Madsen – David P. Madsen – Jeffrey A. Laurich – J. C. Malitzke – Craig P. Black – Adam M. Ferris.

95. Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications by Robert Bond Randall.

96. Harnessing MicroStation V8I by G.V. Krishnan – James Taylor.

97. DEWALT Blueprint Reading Professional Reference (DEWALT Series) by Paul Rosenberg – American Contractors Educational Services.

98. Engineering Drawing and Design by David A. Madsen – David P. Madsen.